Quantity Available: 308
The slot reducer is designed to allow installation of a 3-5mm thick panel (acrylic, plexiglass or steel/aluminum plate). You will need enough of the reducer strip to completely enclose the panel. See the T-slot primer in the specifications section for more information and pictures on how to use the slot reducer. This reducer is compatible with PG30 extrusions.
Note: Orders of quantity less than 50 may be cut into 1m lengths instead of 2m in order to reduce shipping costs.
This insert partially fills in the groove of a PG30 T-slot profile so a panel can be pressed in and held in place. Here's a list of compatible profiles: