Language - Python

From Phidgets Support


Quick Downloads

Documentation

Example Code

Libraries

Getting Started with Python

Welcome to using Phidgets with Python! By using Python, you will have access to the complete Phidget22 API, including events. We also provide example code in Python for all Phidget devices.

If you are developing for Windows, keep reading. Otherwise, select your operating system to jump ahead:

Windows

Install Phidget Drivers and Python module for Windows

Before getting started with the guides below, ensure you have the following components installed on your machine:

  1. You will need the Phidgets Windows Drivers
  2. You will need a version of Python installed on your machine (both 2.7 and 3.6 are compatible with Phidgets).
  3. You will also need to download the Phidget Python module.

After unpacking the Phidget Python module, open the command prompt at folder location and enter the following command:

python setup.py install

This will build the module and install the Python module files into your site-packages directory.

Python install.png

Command line

Use our examples

One of the best ways to start programming with Phidgets is to use our example code as a guide. Before we get started, make sure you have read how to install the Phidget Python module section above.


Now that you have Python and the Phidget Python module installed, select an example that will work with your Phidget:


Open the command prompt at the location of the example and enter the following command:

python example.py

Ensure that PhidgetHelperFunctions.py is in the same folder as the example.

Python command run.png

You should now have the example up and running for your device. Your next step is to look at the Editing the Examples section below for information about the example and important concepts for programming Phidgets. This would be a good time to play around with the device and experiment with some of its functionality.

Setting Up a New Script

When you are building a script from scratch, or adding Phidget functionality to an existing script, you'll need to configure your program to properly link the Phidget Python library.

To include the Phidget Python library, add the following line to your code:

from Phidget22.PhidgetException import *
from Phidget22.Phidget import *

Then, you will also have to add a reference to your particular Phidget. For example, you would include the following line for a DigitalInput:

from Phidget22.Devices.DigitalInput import *

You can now compile the file as shown in the previous section.

The project now has access to Phidgets.

IDLE

Use our examples

One of the best ways to start programming with Phidgets is to use our example code as a guide. Before we get started, make sure you have read how to install the Phidget Python module section above.


Now that you have Python and the Phidget Python module installed, select an example that will work with your Phidget:


Right-click on the example and open it in IDLE:

Python idle open.png


To run the example, simply click on Run and select Run Module:

Python idle run.png

Ensure that PhidgetHelperFunctions.py is in the same folder as the example.

You should now have the example up and running for your device. Your next step is to look at the Editing the Examples section below for information about the example and important concepts for programming Phidgets. This would be a good time to play around with the device and experiment with some of its functionality.

Setting Up a New Script

When you are building a script from scratch, or adding Phidget functionality to an existing script, you'll need to configure your program to properly link the Phidget Python library.


To include the Phidget Python library, add the following line to your code:

from Phidget22.PhidgetException import *
from Phidget22.Phidget import *

Then, you will also have to add a reference to your particular Phidget. For example, you would include the following line for a DigitalInput:

from Phidget22.Devices.DigitalInput import *

You can now compile the file as shown in the previous section.

The project now has access to Phidgets.

Visual Studio

Use our examples

One of the best ways to start programming with Phidgets is to use our example code as a guide. Before we get started, make sure you have read how to install the Phidget Python module section above. You will also need to download Microsoft Visual Studio if you have not already.

Now that you have Python and the Phidget Python module installed, as well as Visual Studio, select an example that will work with your Phidget:


Next, create a new Python project:

Python vs newproject.PNG


Delete the Python file that was generated with the project:

Python vs delete.png


Add the example you just downloaded by right-clicking on the project and adding an existing item:

Python vs addexisting.png

Add PhidgetHelperFunctions.py in the same as the example.

Select the example as the startup file:

Python vs startupproject.png


Ensure that your Python environment is the same as the version you have installed. Enter the following command to view your Python version if you are unsure:

python -V
Python version.PNG

You can view/edit your Python environment under the Python Environments tab:

Python vs environment.png


You should now have the example up and running for your device. Your next step is to look at the Editing the Examples section below for information about the example and important concepts for programming Phidgets. This would be a good time to play around with the device and experiment with some of its functionality.

Setting Up a New Project

When you are building a project from scratch, or adding Phidget functionality to an existing project, you'll need to configure your development environment to properly link the Phidget Python library.

To start, you need to create your project as shown in the previous section.

To include the Phidget Python library, add the following line to your code:

from Phidget22.PhidgetException import *
from Phidget22.Phidget import *

Then, you will also have to add a reference to your particular Phidget. For example, you would include the following line for a DigitalInput:

from Phidget22.Devices.DigitalInput import *

The project now has access to Phidgets.

LiClipse

Use our examples

One of the best ways to start programming with Phidgets is to use our example code as a guide. Before we get started, make sure you have read how to install the Phidget Python module section above. You will also need to download LiClipse if you have not already.

Now that you have Python and the Phidget Python module installed, as well as LiClipse, select an example that will work with your Phidget:


Next, create a new Python project:

Python liclipse newproject.PNG


Add the example you just downloaded by dragging it into the project:

Python liclipse import.png

Add PhidgetHelperFunctions.py to the project by dragging it into the project.

Finally, run the project:

Python liclipse run.png


You should now have the example up and running for your device. Your next step is to look at the Editing the Examples section below for information about the example and important concepts for programming Phidgets. This would be a good time to play around with the device and experiment with some of its functionality.

Setting Up a New Project

When you are building a project from scratch, or adding Phidget functionality to an existing project, you'll need to configure your development environment to properly link the Phidget Python library.

To start, you need to create your project as shown in the previous section.

To include the Phidget Python library, add the following line to your code:

from Phidget22.PhidgetException import *
from Phidget22.Phidget import *

Then, you will also have to add a reference to your particular Phidget. For example, you would include the following line for a DigitalInput:

from Phidget22.Devices.DigitalInput import *

The project now has access to Phidgets.

macOS

Install Phidget Drivers and Python module for macOS

Before getting started with the guides below, ensure you have the following components installed on your machine:

  1. You will need the Phidgets macOS Drivers
  2. You will need a version of Python installed on your machine (both 2.7 and 3.6 are compatible with Phidgets).
  3. You will also need to download the Phidget Python module.

After unpacking the Phidget Python module, open the terminal at folder location and enter the following command:

python setup.py install

This will build the module and install the Python module files into your site-packages directory.

Python mac install.png

Terminal

Use our examples

One of the best ways to start programming with Phidgets is to use our example code as a guide. Before we get started, make sure you have read how to install the Phidget Python module section above.


Now that you have Python and the Phidget Python module installed, select an example that will work with your Phidget:


Open the terminal at the location of the example and enter the following command:

python example.py

Ensure that PhidgetHelperFunctions.py is in the same folder as the example.

Python mac terminal run.png

You should now have the example up and running for your device. Your next step is to look at the Editing the Examples section below for information about the example and important concepts for programming Phidgets. This would be a good time to play around with the device and experiment with some of its functionality.

Setting Up a New Script

When you are building a script from scratch, or adding Phidget functionality to an existing script, you'll need to configure your program to properly link the Phidget Python library.

To include the Phidget Python library, add the following line to your code:

from Phidget22.PhidgetException import *
from Phidget22.Phidget import *

Then, you will also have to add a reference to your particular Phidget. For example, you would include the following line for a DigitalInput:

from Phidget22.Devices.DigitalInput import *

You can now compile the file as shown in the previous section.


The project now has access to Phidgets.

Linux

Install Phidget Drivers and Python module for Linux

Before getting started with the guides below, ensure you have the following components installed on your machine:

  1. You will need the Phidgets Linux Drivers
  2. You will need a version of Python installed on your machine (both 2.7 and 3.6 are compatible with Phidgets).
  3. You will also need to download the Phidget Python module.

You will also need to download the Phidget Python module.

After unpacking the Phidget Python module, open the terminal at folder location and enter the following command:

python setup.py install

This will build the module and install the Python module files into your site-packages directory.

Python linux install.PNG

Terminal

Use our examples

One of the best ways to start programming with Phidgets is to use our example code as a guide. Before we get started, make sure you have read how to install the Phidget Python module section above.


Now that you have Python and the Phidget Python module installed, select an example that will work with your Phidget:


Open the terminal at the location of the example and enter the following command:

python example.py

Ensure that PhidgetHelperFunctions.py is in the same folder as the example.

Python linux terminal run.png

You should now have the example up and running for your device. Your next step is to look at the Editing the Examples section below for information about the example and important concepts for programming Phidgets. This would be a good time to play around with the device and experiment with some of its functionality.

Setting Up a New Script

When you are building a script from scratch, or adding Phidget functionality to an existing script, you'll need to configure your program to properly link the Phidget Python library.

To include the Phidget Python library, add the following line to your code:

from Phidget22.PhidgetException import *
from Phidget22.Phidget import *

Then, you will also have to add a reference to your particular Phidget. For example, you would include the following line for a DigitalInput:

from Phidget22.Devices.DigitalInput import *

The script now has access to Phidgets.

Editing the Examples

To get our example code to run in a custom application, simply remove the calls to AskForDeviceParameters and PrintEventDescriptions, and hard-code the addressing parameters for your application.

If you are unsure what values to use for the addressing parameters, check the Finding The Addressing Information page.

For instance:

channelInfo = AskForDeviceParameters(ch)
        
ch.setDeviceSerialNumber(channelInfo.deviceSerialNumber)
ch.setHubPort(channelInfo.hubPort)
ch.setIsHubPortDevice(channelInfo.isHubPortDevice)
ch.setChannel(channelInfo.channel)   
        
if(channelInfo.netInfo.isRemote):
    ch.setIsRemote(channelInfo.netInfo.isRemote)
    if(channelInfo.netInfo.serverDiscovery):
        Net.enableServerDiscovery(PhidgetServerType.PHIDGETSERVER_DEVICEREMOTE)
    else:
        Net.addServer("Server", channelInfo.netInfo.hostname,
            channelInfo.netInfo.port, channelInfo.netInfo.password, 0)

Might become:

ch.setDeviceSerialNumber(370114)
ch.setHubPort(2)
ch.setIsHubPortDevice(1)

Notice that you can leave out any parameter not relevant to your application for simplicity.

You can then manipulate the rest of the code as your application requires. A more in-depth description of programming with Phidgets follows in the Write Code section.

Write Code

By following the instructions for your operating system and compiler above, you now have working examples and a project that is configured. This teaching section will help you understand how the examples were written so you can start writing your own code.


Remember: your main reference for writing Python code will be the Phidget22 API Manual and the example code.

Step One: Create and Address

You will need to declare your Phidget object in your code. For example, we can declare a digital input object like this:

ch = DigitalInput()

Next, we can address which Phidget we want to connect to by setting parameters such as DeviceSerialNumber.

ch.setDeviceSerialNumber(496911)

Although we are not including it on this page, you should handle exceptions of all Phidget functions. Here is an example of the previous code with error handling:

try:
  ch = DigitalInput()	
except RuntimeError as e:
  print("Runtime Error: %s" % e.message) 
try:
  ch.setDeviceSerialNumber(496911)
except PhidgetException as e:
  print (Phidget Exception %i: %s % (e.code, e.details))

Step Two: Open and Wait for Attachment

After we have specified which Phidget to connect to, we can open the Phidget object like this:

ch.openWaitForAttachment(5000)

To use a Phidget, it must be plugged in (attached). We can handle this by calling openWaitForAttachment, which will block indefinitely until a connection is made, or until the timeout value is exceeded. Simply calling open does not guarantee you can use the Phidget immediately.

Alternately, you could verify the device is attached by using event driven programming and tracking the attach events.

To use events to handle attachments, we have to modify our code slightly:

ch = DigitalInput()	
ch.setOnAttachHandler(onAttachHandler)
ch.openWaitForAttachment(5000)

Next, we have to declare the function that will be called when an attach event is fired - in this case the function onAttachHandler will be called:

def onAttachHandler(e):
    print("Phidget attached!")

We recommend using this attach handler to set any initialization parameters for the channel such as DataInterval and ChangeTrigger from within the AttachHandler, so the parameters are set as soon as the device becomes available.

Step Three: Do Things with the Phidget

We recommend the use of event driven programming when working with Phidgets. In a similar way to handling an attach event as described above, we can also add an event handler for a state change event:

ch = DigitalInput()	
ch.setOnAttachHandler(onAttachHandler)
ch.setOnStateChangeHandler(onStateChangeHandler)
ch.openWaitForAttachment(5000)

This code will connect a function to an event. In this case, the onStateChangeHandler function will be called when there has been a change to the channel's input. Next, we need to create the onStateChangeHandler function:

def onStateChangeHandler(self, state):
    print("State %f" % state)
    return 0

If you are using multiple Phidgets in your program, check out our page on Using_Multiple_Phidgets for information on how to properly address them and use them in events.

If events do not suit your needs, you can also poll the device directly for data using code like this:

state = ch.getState()
print("State %f" % state)

Important Note: There will be a period of time between the attachment of a Phidget sensor and the availability of the first data from the device. Any attempts to get this data before it is ready will result in an exception. See more information on this on our page for Unknown Values.

Enumerations

Some Phidget devices have functions that deal with specific predefined values called enumerations. Enumerations commonly provide readable names to a set of numbered options.

Enumerations with Phidgets in Python will take the form of EnumerationType.ENUMERATION_NAME.

For example, specifying a SensorType to use the 1142 for a voltage input would look like:

VoltageSensorType.SENSOR_TYPE_1142

and specifying a K-Type thermocouple for a temperature sensor would be:

ThermocoupleType.THERMOCOUPLE_TYPE_K

The Phidget error code for timing out could be specified as:

ErrorCode.EPHIDGET_TIMEOUT

You can find the Enumeration Type under the Enumerations section of the Phidget22 API for your device, and the Enumeration Name in the drop-down list within.

Step Four: Close and Delete

At the end of your program, be sure to close and delete your device:

ch.close()

Further Reading

Phidget Programming Basics - Here you can find the basic concepts to help you get started with making your own programs that use Phidgets.

Data Interval/Change Trigger - Learn about these two properties that control how much data comes in from your sensors.

Using Multiple Phidgets - It can be difficult to figure out how to use more than one Phidget in your program. This page will guide you through the steps.

Polling vs. Events - Your program can gather data in either a polling-driven or event-driven manner. Learn the difference to determine which is best for your application.

Logging, Exceptions, and Errors - Learn about all the tools you can use to debug your program.

Phidget Network Server - Phidgets can be controlled and communicated with over your network- either wirelessly or over ethernet.