|3205_0 - Towerpro MG90 Micro Servo|
- 175° of travel
- Light weight high strength nylon casing
- Durable Metal gear with bearing
The MG90 comes with 3 servo rudder pieces and 1 set of screws.
The MG90 is a nice small RC servo ideal for projects where size and weight are important.
RC servos are hobbyist remote control servos typically used in radio-controlled models, where they provide actuation for various mechanical systems such as the steering of a car, the flaps on a plane, or the rudder of a boat. These servos are not industrial grade and are not recommended for continuous heavy use.
|Motor Type||Limited Rotation Servo|
|Range of Rotation||175°|
|Maximum Speed at Rated Voltage||545°/s|
|Rated Torque||2 kg·cm|
|Gear Train Material||Metal|
|Bearing Type||Dual Ball Bearing|
|Motor Length||29 mm|
|Motor Width||23 mm|
|Motor Depth||12.2 mm|
|Wire Length||250 mm|
|Rated Voltage||5 V DC|
|Rated Current (on 1061 controller)||90 mA|
|Rated Current (on 1066 controller)||100 mA|
|Stall Current (on 1061 controller)||480 mA|
|Stall Current (on 1066 controller)||430 mA|
The 3205 - Micro Servo can be used with the following Phidget motor controllers:
The 1061 will produce a little more torque than 1066.