|3108_1 - TPK-03 Immersion Probe K-type Thermocouple (-50 to +700°C)|
- Can take continuous temperature readings between -50°C to +800°C
- Can take a single temperature reading between -100°C to +900°C
- Wire length: 70cm extendable to 170cm
- Removable Miniature Male Connector
The 3108 - K-Type thermocouple can take continuous temperature readings between -50°C to +800°C with a ±0.75°C accuracy. The 3108 can also take a instant, single temperature reading between -100°C to +900°C.
It is mostly used to take the temperature of liquids and gels.
The Thermocouple comes with a standard miniature male connector that can be removed to uncover the stripped wires when connecting it to one of the following Phidget temperature sensor:
On the 1051, connect the white thermocouple wire to (-) terminal block and the red wire to the + terminal block.
On the 1048, connect the white wire to G and the red wire to an input terminal block (numbered 0 to 3).
You could also connect the 3108 to a Phidget Temperature Sensor using a 3106 – Thermocouple Adapter.
For more information on thermocouples, visit the Thermocouple Primer.
|Ambient Temperature Min||-50 °C|
|Ambient Temperature Max||800 °C|
|Ambient Temperature Min (Momentary)||-100 °C|
|Ambient Temperature Max (Momentary)||900 °C|
|Ambient Temperature Error Max||± 0.75 °C|
|Connector Type||Miniature Male Connector|
|Cable Length||0.7 m, extends to 1.7 m|
|Probe Diameter||3.2 mm|
|Cable Gauge||28 AWG|
|Insulation Material||PE Plastic|
|Probe Material||K/316 Stainless Steel|
|Handle Material||Engineering Plastic|