Products for USB Sensing and Control
Quantity Available: 651
| Qty | Price |
|---|---|
| 5 | $3.60 |
| 10 | $3.45 |
This beam type coupling can be used to connect two 5mm shafts together. Each shaft is held in place by two set screws, allowing for easy installation. The spiral cut design allows for up to 2° of bending from angular misalignment of the shafts as well as 0.12mm of eccentric misalignment.
If you're having trouble with slipping, you can file a groove into the shaft where the set screws hold it in place. You can also use Loctite on the set screws to ensure that they remain in place.
Note: New stock of the TRM4333_0 will use M4 set screws which will require a 2mm hex key instead of the 1.5mm key that was needed before.
Stepper motors have high torque and precise position control. This shaft coupler can connect to the main shaft of the following stepper motors:
| Product | Physical Properties | Motor Properties | Electrical Properties | |||
|---|---|---|---|---|---|---|
| Part Number | Price | Shaft Diameter | Mounting Plate Size | Rated Torque | Step Angle | Recommended Voltage |
 NEMA11 - 1.8 Degree - 0.67A Stepper - Gearless
|
$16.00 | 5 mm | NEMA - 11 | 520 g·cm | 1.8° | 24 V DC |
 NEMA14 - 1.8 Degree - 1A Stepper - Gearless
|
$16.00 | 5 mm | NEMA - 14 | 1.2 kg·cm | 1.8° | 24 V DC |
 NEMA17 - 0.9 Degree - 1.68A Stepper - Gearless
|
$20.00 | 5 mm | NEMA - 17 | 3.3 kg·cm | 0.9° | 24 V DC |
 NEMA17 - 1.8 Degree - 1.68A Stepper - Gearless
|
$16.00 | 5 mm | NEMA - 17 | 3.3 kg·cm | 1.8° | 24 V DC |
Brushless DC motors combine smooth rotation with accurate position control. This shaft coupler can connect to the following BLDC Motors:
| Product | Physical Properties | Motor Properties | ||
|---|---|---|---|---|
| Part Number | Price | Shaft Diameter | Rated Torque | Rated Speed |
 NEMA17 - Brushless DC Motor - Gearless
|
$36.00 | 5 mm | 1.3 kg·cm | 4000 RPM |
| Physical Properties | |
|---|---|
| Material | Aluminium |
| Coupling Rated Torque | 10 kg·cm |
| Coupling Rated Speed | 8000 RPM |
| Torsional Stiffness | 110 N·m/rad |
| Shaft Angularity Tolerance | 2° |
| Shaft Eccentricity Tolerance | 150 μm |
| Inner Diameter | 5 mm |
| Weight | 14 g |
| Hex Key Size Required | 1.5 mm |
| Customs Information | |
| Canadian HS Export Code | 8483.60.00 |
| American HTS Import Code | 8483.60.80.00 |
| Country of Origin | CN (China) |
