Template:UgAddressingInformation

From Phidgets Support
Revision as of 21:40, 5 June 2018 by Jdecoux (talk | contribs) (Created page with "===Finding The Addressing Information=== Before you can access the device in your own code, and from our examples, you'll need to take note of the addressing parameters for yo...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Finding The Addressing Information

Before you can access the device in your own code, and from our examples, you'll need to take note of the addressing parameters for your Phidget. These will indicate how the Phidget is physically connected to your application. For simplicity, these parameters can be found by clicking the button at the top of the Control Panel example for that Phidget.

The locate Phidget button is found in the device information box

In the Addressing Information window, the section above the line displays information you will need to connect to your Phidget from any application. In particular, note the Channel Class field as this will be the API you will need to use with your Phidget, and the type of example you should use to get started with it. The section below the line provides information about the network the Phidget is connected on if it is attached remotely. Keep track of these parameters moving forward, as you will need them once you start running our examples or your own code.

All the information you need to address your Phidget