REL1000 User Guide: Difference between revisions

From Phidgets Support
(Created page with "Category:UserGuide __NOTOC__ 300px|right|link= ===Required Hardware=== * A REL1000 4x Relay Phidget * A VINT Hub * A Power supply * A 3-...")
 
No edit summary
Line 15: Line 15:
# Connect the REL1000 to the VINT Hub using the Phidget cable.
# Connect the REL1000 to the VINT Hub using the Phidget cable.
# Connect the VINT Hub to your computer with a USB cable.
# Connect the VINT Hub to your computer with a USB cable.
# Connect the circuits you're switching to the terminal blocks on the REL1000. If you want the circuit to be '''closed''' by default when the relay is not energized, connect the two ends of the circuit to the '''NC''' and '''COM''' ports. If you want the circuit to be '''open''' by default, connect it to the '''NO''' and '''COM''' ports instead.
# Connect the circuits you're switching to the terminal blocks on the REL1000. If you want the circuit to be '''closed''' by default when the relay is not energized, connect the two ends of the circuit to the '''NC''' and '''COM''' terminals. If you want the circuit to be '''open''' by default, connect it to the '''NO''' and '''COM''' terminals instead. It doesn't matter which end of the circuit is connected connected to each of the two terminals in either case.
# Connect the power supply to the barrel jack on the REL1000.
# Connect the power supply to the barrel jack on the REL1000.



Revision as of 11:12, 21 November 2016


REL1000 Functional.jpeg

Required Hardware

  • A REL1000 4x Relay Phidget
  • A VINT Hub
  • A Power supply
  • A 3-wire Phidget cable
  • A USB cable
  • A computer

Connecting the Pieces

  1. Connect the REL1000 to the VINT Hub using the Phidget cable.
  2. Connect the VINT Hub to your computer with a USB cable.
  3. Connect the circuits you're switching to the terminal blocks on the REL1000. If you want the circuit to be closed by default when the relay is not energized, connect the two ends of the circuit to the NC and COM terminals. If you want the circuit to be open by default, connect it to the NO and COM terminals instead. It doesn't matter which end of the circuit is connected connected to each of the two terminals in either case.
  4. Connect the power supply to the barrel jack on the REL1000.


Testing Using Windows

Phidget Control Panel

In order to demonstrate the functionality of the REL1000, the Phidget Control Panel running on a Windows machine will be used.


The Phidget Control Panel is available for use on both macOS and Windows machines.

Windows

To open the Phidget Control Panel on Windows, find the Ph.jpg icon in the taskbar. If it is not there, open up the start menu and search for Phidget Control Panel

Windows PhidgetTaskbar.PNG

macOS

To open the Phidget Control Panel on macOS, open Finder and navigate to the Phidget Control Panel in the Applications list. Double click on the Ph.jpg icon to bring up the Phidget Control Panel.


For more information, take a look at the getting started guide for your operating system:


Linux users can follow the getting started with Linux guide and continue reading here for more information about the REL1000.

First Look

After plugging the REL1000 into your computer and opening the Phidget Control Panel, you will see something like this:

REL1000 Panel.jpg


The Phidget Control Panel will list all connected Phidgets and associated objects, as well as the following information:

  • Serial number: allows you to differentiate between similar Phidgets.
  • Channel: allows you to differentiate between similar objects on a Phidget.
  • Version number: corresponds to the firmware version your Phidget is running. If your Phidget is listed in red, your firmware is out of date. Update the firmware by double-clicking the entry.


The Phidget Control Panel can also be used to test your device. Double-clicking on an object will open an example.

Relay Output

Double-click on a Digital Output object labelled Power Relay in order to run the example: [[Image:{{{1}}}_RelayOutput_Example.jpg|center|link=]]


General information about the selected object will be displayed at the top of the window. You can also experiment with the following functionality:

  • Toggle the state of the relay by pressing the button.


Testing Using Mac OS X

  1. Go to the Quick Downloads section on the Mac OS X page.
  2. Download and run the Phidget OS X Installer
  3. Click on System Preferences >> Phidgets (under Other) to activate the Preference Pane
  4. Make sure your device is properly attached
  5. Double click on your device's objects in the listing to open them. The Preference Pane and examples will function very similarly to the ones described above in the Windows section.

Testing Using Linux

For a general step-by-step guide on getting Phidgets running on Linux, see the Linux page.

Using a Remote OS

We recommend testing your Phidget on a desktop OS before moving on to remote OS. Once you've tested your Phidget, you can go to the PhidgetSBC, or iOS pages to learn how to proceed.

Technical Details

What to do Next

  • Programming Languages - Find your preferred programming language here and learn how to write your own code with Phidgets!
  • Phidget Programming Basics - Once you have set up Phidgets to work with your programming environment, we recommend you read our page on to learn the fundamentals of programming with Phidgets.