Analog Input Boards & Same Code

Any hardware type questions or problems for all other Phidget devices.
Jokerminator
Phidgetsian
Posts: 9
Joined: Tue May 08, 2018 5:36 am
Contact:

Analog Input Boards & Same Code

Postby Jokerminator » Mon May 21, 2018 6:14 am

Hi,

I am using a PhidgetInterfaceKit 8/8/8 ( ID: 1018_2B ) to read data from Sharp infrared distance sensors
  • Sharp Distance Sensor (4-30cm) ID: 3520_0
  • Sharp Distance Sensor (10-80cm) ID: 3521_0
  • Sharp Distance Sensor (20-150cm) ID: 3522_0
via IR Distance Adapters ( ID: 1101_0 ).


Could I also read this data with other boards like the

  • VINT Hub Phidget ( HUB0000_0 ) optional with 8x Voltage Input Phidget ( ID: DAQ1000_0 )
  • PhidgetTextLCD 20X2 : White : Integrated PhidgetInterfaceKit 8/8/8 ( ID: 1203_2B )
  • PhidgetSBC3 ( ID: 1073_0 )
  • PhidgetSBC4 ( ID: SBC3003_0 )
  • PhidgetInterfaceKit 8/8/8 ( ID: 1018_2B )
  • PhidgetInterfaceKit 8/8/8 w/6 Port Hub ( ID: 1019_1B )
  • PhidgetInterfaceKit 2/2/2 ( ID: 1011_0 )

without to change my code ?


Best
Greetings
Timo

User avatar
Patrick
Lead Developer
Posts: 3047
Joined: Mon Jun 20, 2005 8:46 am
Location: Canada
Contact:

Re: Analog Input Boards & Same Code

Postby Patrick » Tue May 22, 2018 11:13 am

HUB0000 requires phidget22, and setting isHubPortDevice to true. SBCs would require an addServer call because you are opening over the network. The others would require no changes at all.

-Patrick


Return to “All Other Phidgets”

Who is online

Users browsing this forum: No registered users and 1 guest