Template:DCMotor ESTOP: Difference between revisions
From Phidgets Support
(Created page with "{{#switch: {{{1}}} | bldc= New BLDC Motor Phidgets include an E-Stop circuit that can be used to trigger a Failsafe state. | dc = New DC Motor Phidgets include an E-Stop circuit that can be used to trigger a Failsafe state. | #default = New Phidget motor controllers include an E-Stop circuit that can be used to trigger a Failsafe state. }} {| class="wikitable" style="margin:auto;width:75%;text-align:center" ! style="text-align: center;" | E-Stop Input Terminals ! sty...") |
(No difference)
|
Latest revision as of 22:45, 15 November 2024
New Phidget motor controllers include an E-Stop circuit that can be used to trigger a Failsafe state.
| E-Stop Input Terminals | Result |
|---|---|
| Shorted | Normal operation |
| Open | Failsafe state activated |
The E-Stop input is shorted with a jumper wire by default. If you would like to implement an E-Stop system, we recommend connecting a normally-closed (NC) switch to the E-Stop input.
Other Considerations
The E-Stop circuit does not physically interact with the supply voltage or the motor connection. You should not wire your motor, or your supply voltage to this circuit.
