ENC4110-4114 User Guide: Difference between revisions
From Phidgets Support
(Created page with "== Mounting the Encoder to a Surface == This linear encoder has mounting holes on either end that allow it to be mounted perpendicular or parallel to a surface. Image:ENC...") |
(No difference)
|
Revision as of 21:27, 26 July 2018
Mounting the Encoder to a Surface
This linear encoder has mounting holes on either end that allow it to be mounted perpendicular or parallel to a surface.
File:ENC4110 Plate1 File:ENC4110 Plate2
When mounting the encoder to a surface, you should take great care in making sure that it lies completely flat and parallel to the moving part it'll be measuring. Any small misalignment can cause inaccuracy in the measurement and strain on the mechanical parts.
