1016 User Guide: Difference between revisions

From Phidgets Support
No edit summary
No edit summary
Line 1: Line 1:
[[Category:UserGuide]]
[[Category:UserGuide]]
==Getting Started==
{{UGIntro|1016}}
*[{{SERVER}}/products.php?product_id=1016 1016 PhidgetCircularTouch] and [{{SERVER}}/products.php?product_id=3016 custom USB cable]
*computer


===Required Hardware===


* A [{{SERVER}}/products.php?product_id=1016 1016 PhidgetCircularTouch] and custom USB cable
Next, you will need to connect the pieces:
* A Computer
 
===Connecting the Pieces===
[[Image:1016_0_Connecting_The_Hardware.jpg|400px|right|link=]]
[[Image:1016_0_Connecting_The_Hardware.jpg|400px|right|link=]]
# Connect the Phidget to your computer using the USB cable
# Connect the Phidget to your computer using the USB cable
<br clear="all">
<br clear="all">
==Testing Using Windows==
{{UGIntroDone|1016}}


==Using the 1016==
{{UGcontrolpanel|1016}}
{{UGcontrolpanel|1016}}


{{ugCapacitiveTouch|1016}}
===Capacitive Touch===
Double-click on the Capacitive Touch object labelled ''PhidgetCircular Touch'' in order to run the example:
[[Image:1016_CapacitiveTouch_Example.jpg|center|link=]]
 


{{UGotheros}}
{{UGExampleDescription}}
*Modify the change trigger and/or data interval value by dragging the sliders. For more information on these settings, see the [[Data_Rate_and_Change_Trigger|data interval/change trigger]] page.
*The sensitivity of the 1016 can also be adjusted. The higher the sensitivity, the more susceptible the 1016 will be to sensing touch.
*When the 1016 senses a touch, the state of the ''Touch?'' checkbox will change.
*The ''Last Value'' label corresponds to the location of the last touch along the 1016.
<br clear="all">


==Technical Details==
==Technical Details==


===Device Inputs===
===Device Inputs===
The PhidgetCircularTouch appears to the Phidget software libraries as a CapacitiveTouch object. Sliding a finger around the touch sensor varies the axis value from 0 to 1 in approximately 125 discrete steps. When the finger is removed, the final measured value is retained.  
The 1016 appears to the Phidget libraries as a CapacitiveTouch object. Sliding a finger around the touch sensor varies the axis value from 0 to 1 in approximately 125 discrete steps. When the finger is removed, the final measured value is retained.  


If it is desired to use the touch slider as an array of buttons, or a combination of an array of buttons and a smaller slide-touch area, one must only interpret specific sub-ranges of sensor values differently in software depending upon the intended use. If sub-ranges of values are to be used as buttons, it is recommended that a small range of sensor values be left between the sub-ranges where a null-response is observed.
If it is desired to use the touch slider as an array of buttons, or a combination of an array of buttons and a smaller slide-touch area, one must only interpret specific sub-ranges of sensor values differently in software depending upon the intended use. If sub-ranges of values are to be used as buttons, it is recommended that a small range of sensor values be left between the sub-ranges where a null-response is observed.


===Dielectric Separation===
===Dielectric Separation===
The PhidgetCircularTouch has been left without components on the contact side so that it may be mounted behind a sheet of glass or plastic. The recommended thickness of separation material is 1/8 inch.  Silicon adhesive is recommended when attaching the Phidget to the material; standing the PhidgetCircularTouch off or creating space between the separation material and the Phidget can cause false-triggering to occur.   
The 1016 has been left without components on the contact side so that it may be mounted behind a sheet of glass or plastic. The recommended thickness of separation material is 1/8".  Silicon adhesive is recommended when attaching the Phidget to the material; standing the 1016 off or creating space between the separation material and the Phidget can cause false-triggering to occur.   


It should be noted that materials thicker than 1/8” may work, but will require a larger surface area of contact to ensure proper triggering (i.e.: two fingers instead of one). Increasing the surface area of the contacting object helps to increase the measurable capacitance at the point of contact that further seperation causes to reduce, balancing these factors out.
It should be noted that materials thicker than 1/8" may work, but will require a larger surface area of contact to ensure proper triggering (i.e. two fingers instead of one). Increasing the surface area of the contacting object helps to increase the measurable capacitance at the point of contact that further seperation causes to reduce, balancing these factors out.


{{UGnext|}}
{{UGnext|}}

Revision as of 21:11, 13 June 2017

Getting Started

Welcome to the 1016 user guide! In order to get started, make sure you have the following hardware on hand:


Next, you will need to connect the pieces:

1016 0 Connecting The Hardware.jpg
  1. Connect the Phidget to your computer using the USB cable


Now that you have everything together, let's start using the 1016!

Using the 1016

Phidget Control Panel

In order to demonstrate the functionality of the 1016, the Phidget Control Panel running on a Windows machine will be used.


The Phidget Control Panel is available for use on both macOS and Windows machines.

Windows

To open the Phidget Control Panel on Windows, find the Ph.jpg icon in the taskbar. If it is not there, open up the start menu and search for Phidget Control Panel

Windows PhidgetTaskbar.PNG

macOS

To open the Phidget Control Panel on macOS, open Finder and navigate to the Phidget Control Panel in the Applications list. Double click on the Ph.jpg icon to bring up the Phidget Control Panel.


For more information, take a look at the getting started guide for your operating system:


Linux users can follow the getting started with Linux guide and continue reading here for more information about the 1016.

First Look

After plugging the 1016 into your computer and opening the Phidget Control Panel, you will see something like this:

1016 Panel.jpg


The Phidget Control Panel will list all connected Phidgets and associated objects, as well as the following information:

  • Serial number: allows you to differentiate between similar Phidgets.
  • Channel: allows you to differentiate between similar objects on a Phidget.
  • Version number: corresponds to the firmware version your Phidget is running. If your Phidget is listed in red, your firmware is out of date. Update the firmware by double-clicking the entry.


The Phidget Control Panel can also be used to test your device. Double-clicking on an object will open an example.

Capacitive Touch

Double-click on the Capacitive Touch object labelled PhidgetCircular Touch in order to run the example:

1016 CapacitiveTouch Example.jpg


General information about the selected object will be displayed at the top of the window. You can also experiment with the following functionality:

  • Modify the change trigger and/or data interval value by dragging the sliders. For more information on these settings, see the data interval/change trigger page.
  • The sensitivity of the 1016 can also be adjusted. The higher the sensitivity, the more susceptible the 1016 will be to sensing touch.
  • When the 1016 senses a touch, the state of the Touch? checkbox will change.
  • The Last Value label corresponds to the location of the last touch along the 1016.


Technical Details

Device Inputs

The 1016 appears to the Phidget libraries as a CapacitiveTouch object. Sliding a finger around the touch sensor varies the axis value from 0 to 1 in approximately 125 discrete steps. When the finger is removed, the final measured value is retained.

If it is desired to use the touch slider as an array of buttons, or a combination of an array of buttons and a smaller slide-touch area, one must only interpret specific sub-ranges of sensor values differently in software depending upon the intended use. If sub-ranges of values are to be used as buttons, it is recommended that a small range of sensor values be left between the sub-ranges where a null-response is observed.

Dielectric Separation

The 1016 has been left without components on the contact side so that it may be mounted behind a sheet of glass or plastic. The recommended thickness of separation material is 1/8". Silicon adhesive is recommended when attaching the Phidget to the material; standing the 1016 off or creating space between the separation material and the Phidget can cause false-triggering to occur.

It should be noted that materials thicker than 1/8" may work, but will require a larger surface area of contact to ensure proper triggering (i.e. two fingers instead of one). Increasing the surface area of the contacting object helps to increase the measurable capacitance at the point of contact that further seperation causes to reduce, balancing these factors out.

What to do Next

  • Programming Languages - Find your preferred programming language here and learn how to write your own code with Phidgets!
  • Phidget Programming Basics - Once you have set up Phidgets to work with your programming environment, we recommend you read our page on to learn the fundamentals of programming with Phidgets.