Template:UgVoltageInputPWR: Difference between revisions
From Phidgets Support
(Created page with "===Voltage Input=== right|link= When you double click on an Voltage Input object, a window like the one pictured will open. * At the...") |
(No difference)
|
Revision as of 22:29, 7 June 2017
Voltage Input
When you double click on an Voltage Input object, a window like the one pictured will open.
- At the top of the window, information about your device and the properties of this particular channel will be listed.
- On the left, change trigger and/or data interval can be changed. For more information on these settings, see the Data Rate/Change Trigger page. The power supply setting must be set to the voltage expected by the sensor connected to the adapter.
- On the right, the current reading of the raw voltage is listed beside "Voltage".
