Template:UgVoltageRatioAxis: Difference between revisions
From Phidgets Support
(Created page with "===Voltage Ratio Input (Axis)=== right|link= When you double click on an Joystick Axis object, a window like the one pictured will o...") |
(No difference)
|
Revision as of 19:51, 30 May 2017
Voltage Ratio Input (Axis)
When you double click on an Joystick Axis object, a window like the one pictured will open.
- At the top of the window, information about your device and the properties of this particular channel will be listed.
- On the left, change trigger and/or data interval can be changed. For more information on these settings, see the Data Rate/Change Trigger page.
- On the right, the voltage ratio is reported in volts per volt. In this case, a value of 1.0 corresponds to the maximum tilt in one direction of the axis, and a value of -1.0 corresponds to the maximum tilt in the other direction.
