Template:UgRelayOutput: Difference between revisions
From Phidgets Support
(Created page with "===Relay Output=== right|link= When you double click on the "Power Relay" or "Signal Relay", a window like the one pictured will open. *...") |
(No difference)
|
Revision as of 11:18, 21 November 2016
Relay Output
When you double click on the "Power Relay" or "Signal Relay", a window like the one pictured will open.
- At the top of the window, information about your device and the properties of this particular channel will be listed.
- At the bottom is a button you can press to toggle the on/off state of the relay. If you have a test circuit hooked up to the relay, you should be able to toggle power to the circuit. If the relay is a mechanical relay, you should hear an audible click as the circuit closes.
