Template:UgVoltageRatioBridge: Difference between revisions
From Phidgets Support
(Created page with "===Bridge Input=== right|link= When you double click on a Bridge Input object, a window like the one pictured will open. * At the...") |
(No difference)
|
Revision as of 20:38, 26 August 2016
Bridge Input
When you double click on a Bridge Input object, a window like the one pictured will open.
- At the top of the window, information about your device and the properties of this particular channel will be listed.
- On the left, change trigger and/or data interval can be changed. For more information on these settings, see the Data Rate/Change Trigger page. There's also an enable control that toggles power to the bridge input, and a gain selector. For more information about choosing the best gain, see the technical section.
- On the right, the voltage ratio for this input is displayed in real-time. To convert to the appropriate units for your load cell or sensor, see the data sheet or user guide of that sensor.
