Static IP Ethernet Direct to PC Issue. Again.

Any hardware type questions or problems for all other Phidget devices.
danthoskin
Phidgetly
Posts: 35
Joined: Wed Oct 30, 2019 5:44 pm
Contact:

Re: Static IP Ethernet Direct to PC Issue. Again.

Post by danthoskin »

Good morning Patrick,
The 5 hubs in the machine seem to be all communicating happily now. It was definitely 'operator error' on my part, because once I had the IP's all configured it still wasn't working repeatably until...
I changed the host names of the hubs so they weren't all the default "hub5000". Oops.
Thanks again for your help with all of this and if I have a hint of trouble with them from here on out I'll go the usb route. Seems to be running happily now though.

Thanks,
Dan
danthoskin
Phidgetly
Posts: 35
Joined: Wed Oct 30, 2019 5:44 pm
Contact:

Re: Static IP Ethernet Direct to PC Issue. Again.

Post by danthoskin »

Here is the log from the hub that doesn't show any branches or connected devices in the Control Panel:

2020-03-06T17:38:49 <ERROR> phidget22 :
****************************** Logging Enabled ******************************
* Phidget22 - Version 1.6 - Built Mar 6 2020 10:34:26 *
*******************************************************************************
2020-03-06T18:00:57 <ERROR> www[handleWWWClient()] : failed to handle phidgets websocket connection
server.c+658 handleDeviceClient() : (Broken Pipe) failed to handle client request
[0x75dfb8]subiop complete 0x652c20
server.c+629 handleDeviceClient() : (Broken Pipe) handleNetworkRequest() failed
servers.c+676 handleNetworkRequest() : (Broken Pipe) failed to read request
network.c+640 readRequestHeader() : (Broken Pipe) failed to read request header
websocket.c+270 netconnread() : (Broken Pipe) failed to read from websocket
2020-03-06T18:11:20 <ERROR> phidget22net[runClientConnection()] : 'hub5000-1' failed for client phid22device://192.168.123.123:51578
server.c+658 handleDeviceClient() : (Connection Reset) failed to handle client request
[0x5078d0]subiop complete 0x5b0520
server.c+629 handleDeviceClient() : (Connection Reset) handleNetworkRequest() failed
servers.c+676 handleNetworkRequest() : (Connection Reset) failed to read request
network.c+640 readRequestHeader() : (Connection Reset) failed to read request header
network.c+587 pnread() : (Connection Reset) TCP read failed
2020-03-07T10:18:05 <ERROR> www[handleWWWClient()] : failed to handle phidgets websocket connection
server.c+658 handleDeviceClient() : (Broken Pipe) failed to handle client request
[0x653318]subiop complete 0x5b0520
server.c+629 handleDeviceClient() : (Broken Pipe) handleNetworkRequest() failed
servers.c+676 handleNetworkRequest() : (Broken Pipe) failed to read request
network.c+640 readRequestHeader() : (Broken Pipe) failed to read request header
websocket.c+270 netconnread() : (Broken Pipe) failed to read from websocket
danthoskin
Phidgetly
Posts: 35
Joined: Wed Oct 30, 2019 5:44 pm
Contact:

Re: Static IP Ethernet Direct to PC Issue. Again.

Post by danthoskin »

This is all that came up in the log of the hub that does that 'flashing behavior:

2020-03-06T17:38:59 <ERROR> phidget22 :
****************************** Logging Enabled ******************************
* Phidget22 - Version 1.6 - Built Mar 6 2020 10:34:26 *
*******************************************************************************


This was taken as the device was connected to a temperature Phidget and it was 'flashing' in and out of existence. The temperature unit, not the entire hub. It remained connected.

Dan
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest