calibration ph1130

Technical Discussions on any InterfaceKits
Post Reply
max.tisc
Fresh meat
Posts: 3
Joined: Thu May 18, 2017 9:03 am
Contact:

calibration ph1130

Post by max.tisc »

Hello
I have read the posts concerning ph calibration by 2 points but i do not understand how to make the correction, i use the equation PH = 7 - (2.5 - SensorValue / 200) / (0.257179 + 0.000941468 * Temperature)
With the first calibration point at 7.00ph (offset) I will try asymmetry, so I subtract it or add it to the ph value resulting from the equation (correct?)
The second point I do at 4 or 9ph and with the Nernst equation calculate the slope value but at this point I do not know where to enter the value in the formula to get the correct values

Do you have suggestions or other ways to get the result?
thanks
mrcrabs
Fresh meat
Posts: 1
Joined: Tue Sep 05, 2017 2:20 am
Contact:

Re: calibration ph1130

Post by mrcrabs »

Hi,

Same question for me. As it is very simple to calibrate with a simple equation (example at ​
https://phidgets.wordpress.com/2014/05/ ... r-dummies/), doing the same with temperature compensation isn't described on the web.

Or the problem comes from our lacks in mathematics ... !

It will be pleasant if someone could help us here :-)

Sincerely,
max.tisc
Fresh meat
Posts: 3
Joined: Thu May 18, 2017 9:03 am
Contact:

Re: calibration ph1130

Post by max.tisc »

Hello mrcrabs
thanks for your indication the article is interesting
in the case of calibration I think refer to the temperature of 25 ° C and anyway the calibration solutions are stable at the temperature variation (they come in a few pts of pH)
I will try to find the solution and if yes, I will share it, if someone has any suggestions please post

thank you
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests