Dead Phidget 1012

Comments & issues
9000cse
Phidgetly
Posts: 19
Joined: Sat Nov 02, 2013 7:50 am
Location: Southampton, UK
Contact:

Dead Phidget 1012

Postby 9000cse » Wed Nov 04, 2020 10:12 am

Hi all. I have a PhidgetInterfaceKit 0/16/16
ID: 1012_2, which has worked faultlessly for the past 7 or so years.
Today, when attaching a new output LED, it went down. (taking out my computer sound system and a monitor. God knows how that happened?)
Thing is, is there anywhere I can send it to be repaired? (I live in the UK BTW).

Windows fault code (Windows 10, 64 bit)
Windows has stopped this device because it has reported problems. (Code 43)

A USB port reset request failed.


When connecting the USB cable, Windows does acknowledge the fact.

Any help would be great.

Thanks for reading.

Andy (asjmm9000@gmail.com)
Last edited by 9000cse on Thu Nov 05, 2020 4:32 am, edited 1 time in total.

9000cse
Phidgetly
Posts: 19
Joined: Sat Nov 02, 2013 7:50 am
Location: Southampton, UK
Contact:

Re: Dead Phidget 1012

Postby 9000cse » Thu Nov 05, 2020 4:31 am

Anybody???

9000cse
Phidgetly
Posts: 19
Joined: Sat Nov 02, 2013 7:50 am
Location: Southampton, UK
Contact:

Re: Dead Phidget 1012

Postby 9000cse » Thu Nov 05, 2020 4:54 am

Just an update. I have loaded Phidget CP to my W10,64 laptop. and connected the 1012 to it. LT does not see 1012.
But I get 5v on all 5v to ground points on the 1012.
Here is the most uptodate log file.

2020-11-05T10:46:07 <Info> phidget22 :
****************************** Logging Enabled ******************************
* Phidget22 - Version 1.6 - Built Oct 24 2020 22:01:46 *
* Release 1.6.20201024 - Windows (64-bit) *
*******************************************************************************
2020-11-05T10:46:08 <Info> phidget22net[PhidgetNet_start()] : Starting Networking
2020-11-05T10:46:08 <Info> phidget22net[PhidgetNet_stop()] : Stopping Networking
2020-11-05T10:50:20 <Info> phidget22 :
****************************** Logging Enabled ******************************
* Phidget22 - Version 1.6 - Built Oct 24 2020 22:01:46 *
* Release 1.6.20201024 - Windows (64-bit) *
*******************************************************************************
2020-11-05T10:50:20 <Info> phidget22net[PhidgetNet_start()] : Starting Networking
2020-11-05T10:50:20 <Info> phidget22net[PhidgetNet_stop()] : Stopping Networking


Cheers

User avatar
mparadis
Site Admin
Posts: 769
Joined: Fri Oct 28, 2011 12:17 pm
Contact:

Re: Dead Phidget 1012

Postby mparadis » Thu Nov 05, 2020 9:56 am

Based on your description of the failure, it sounds like something pretty serious happened electrically. If the board no longer shows up in the Phidget Control Panel (when it did moments before this incident) it's likely that the USB processor has been damaged.

You could try to repair it by replacing the USB processor, but there's no telling what else was damaged in the process so it would probably be cheaper to order a new device. We still sell the 1012, and we also have the REL1101 + HUB0000 which is the successor to the 1012 (but you must use the Phidget22 version of our software libraries if you use the REL1101)

9000cse
Phidgetly
Posts: 19
Joined: Sat Nov 02, 2013 7:50 am
Location: Southampton, UK
Contact:

Re: Dead Phidget 1012

Postby 9000cse » Sun Nov 08, 2020 5:06 am

Thanks for you reply. first question. USB chip, which chip is that?
I like repairing stuff.

Ill check out the REL1101 + HUB0000 . do you ship to the UK?

many thanks.

9000cse
Phidgetly
Posts: 19
Joined: Sat Nov 02, 2013 7:50 am
Location: Southampton, UK
Contact:

Re: Dead Phidget 1012

Postby 9000cse » Mon Nov 09, 2020 4:34 am

Will the REL1101 + HUB0000 work with the 1102 IR-REFLECTIVE SENSOR?

User avatar
mparadis
Site Admin
Posts: 769
Joined: Fri Oct 28, 2011 12:17 pm
Contact:

Re: Dead Phidget 1012

Postby mparadis » Mon Nov 09, 2020 2:54 pm

USB chip, which chip is that?

It's the middle of the three large rectangular chips. But again, I don't recommend attempting a repair even if you have surface mount tools, because there's no guarantee it's the only broken part.

do you ship to the UK?

Yes, we ship directly to the UK and we also have dealers in the UK.

Will the REL1101 + HUB0000 work with the 1102 IR-REFLECTIVE SENSOR?

Yes, the ports on the HUB0000 can be opened as a VoltageRatioInput object in order to use simple sensors like the 1102.

fraser
Engineering
Posts: 284
Joined: Thu Nov 19, 2009 4:41 pm
Contact:

Re: Dead Phidget 1012

Postby fraser » Tue Nov 10, 2020 8:45 am

USB chip, which chip is that?


Regarding this, replacing the chip would leave you with no firmware. So the device wouldn't do anything.

9000cse
Phidgetly
Posts: 19
Joined: Sat Nov 02, 2013 7:50 am
Location: Southampton, UK
Contact:

Re: Dead Phidget 1012

Postby 9000cse » Wed Nov 11, 2020 8:44 am

Hi Thanks for the above info. will buy from Robotshop.

9000cse
Phidgetly
Posts: 19
Joined: Sat Nov 02, 2013 7:50 am
Location: Southampton, UK
Contact:

Re: Dead Phidget 1012

Postby 9000cse » Wed Nov 11, 2020 9:20 am

Hi once again. Just been looking at my software. and the only PHIDGETS devices it accepts are.
1012_1, 1012_2 1018_1 & 1018_2

Can REL1101 + HUB0000 be a substitute?

And is the 1012 still available to buy? I see on ROBOTSHOP it looks to be on back order.

Many THANKS Andy


Return to “General”

Who is online

Users browsing this forum: No registered users and 1 guest