Open from multiple processes

C, C++, and Visual C++
Fresh meat
Posts: 1
Joined: Thu Oct 18, 2018 2:46 am

Open from multiple processes

Postby Ondrej.Janda » Thu Oct 18, 2018 3:27 am

I was wondering if it is possible (using the VINT hubs) to open and attach channels (let’s say DI) on one physical hardware (DAQ1200_0) from different contexts/processes. Basically each process reading its own DI (different index).
I know it is not possible with the InterfaceKit 8/8/8, probably because the USB is blocked for the first process that asks for it, but I am wondering if anything changed with the VINT.


Posts: 271
Joined: Thu Nov 19, 2009 4:41 pm

Re: Open from multiple processes

Postby fraser » Thu Oct 18, 2018 9:23 am

I believe this is only possible if you access it over the network.

Since the VINT devices are all accessed through a the VINT hub (which unless you're using a SBC, is a USB device) you wont be able to access it from two processes.

Posts: 6
Joined: Thu Mar 29, 2018 12:34 pm

Re: Open from multiple processes

Postby peterpolidoro » Fri Mar 08, 2019 9:20 am

If there are multiple VINT hubs connected to the host computer, is it possible to use a separate process for each hub? Or is the communication with the devices always limited to a single process, even if each hub is a separate USB device?

User avatar
Site Admin
Posts: 700
Joined: Fri Oct 28, 2011 12:17 pm

Re: Open from multiple processes

Postby mparadis » Fri Mar 08, 2019 10:16 am

If you have multiple VINT hubs, you can access each one with a different program or process. You can do this by setting the serial number of the channel before opening to match the serial of the desired hub.

User avatar
Lead Developer
Posts: 3164
Joined: Mon Jun 20, 2005 8:46 am
Location: Canada

Re: Open from multiple processes

Postby Patrick » Tue Mar 12, 2019 11:04 am

This is one of the main use cases for the Network Server. When connecting locally, latency is less then 1ms compared to a direct USB connection, and this allows you to access the same hardware from multiple processes.


Return to “C/C++”

Who is online

Users browsing this forum: No registered users and 2 guests