Search Results

by jdecoux
Fri Jun 14, 2024 9:18 am
Forum: General
Topic: PoE Splitter no VINT Connection
Replies: 1
Views: 313

Re: PoE Splitter no VINT Connection

You are going to have to be more specific when you say you are powering a "VINT". I assume from context you are using a HUB5000 VINT Hub? If the device shows up and works from the Control Panel, you should be able to use it in your code. It sounds like you have already discovered the "...
by jdecoux
Wed Jun 12, 2024 10:02 am
Forum: Labview
Topic: Read to different sensors in VIN HUB Phidget
Replies: 1
Views: 431

Re: Read to different sensors in VIN HUB Phidget

At a glance, your diagrams look like they should work.

What specifically isn't working?

What is the addressing information in the DeviceInfo clusters?
by jdecoux
Thu Jun 06, 2024 8:24 am
Forum: General
Topic: Arduino vs Phidgets
Replies: 1
Views: 530

Re: Arduino vs Phidgets

Arduinos are microcontrollers, which means they are the processor in the system. They run standalone applications, but will have greatly reduced processing power, connectivity, etc. relative to a computer you are used to working with. Unless you really want to learn the complexities of wiring your o...
by jdecoux
Wed May 15, 2024 8:47 am
Forum: General
Topic: Recommended Load Cell
Replies: 1
Views: 1330

Re: Recommended Load Cell

The 3132 load cell is intended for use in applications like kitchen scales, where they can be zeroed regularly. For longer running measurements, FCR4130 is likely closer to what you are looking for if you really need to minimize drift measuring up to 1N (102g). This is a 300g load cell rated for lon...
by jdecoux
Tue May 14, 2024 9:24 am
Forum: General
Topic: DAQ1500_0 loosing zero?
Replies: 3
Views: 1095

Re: DAQ1500_0 loosing zero?

How good are your load cells? All load cells drift (change offset) over time, and cheaper ones can drift relatively quickly. The expectation on these load cells is that you are able to re-zero the system between readings. If this is not possible in your system, we recommend investing in better load ...
by jdecoux
Tue May 14, 2024 9:17 am
Forum: General
Topic: Numbers Returned
Replies: 1
Views: 809

Re: Numbers Returned

Readings from the DAQ1500 should be within +/-0.5 at gain 1, or +/-0.00390625 at gain 128. How are you getting a reading of 6170.2? The conversion of DAQ1500 readings to your units is defined by your calibration math, as it will be slightly different for each load cell you connect. I see from your p...
by jdecoux
Mon Apr 22, 2024 9:18 am
Forum: General
Topic: Detecting a knock on a door
Replies: 1
Views: 6137

Re: Detecting a knock on a door

You may have luck using an accelerometer, such as the MOT0100, to directly detect vibrations in the door. You would have to attach the sensor to the door near the hinges to prevent the sensor cable interfering with the operation of the door.
by jdecoux
Thu Apr 11, 2024 12:00 pm
Forum: General
Topic: DAQ1400 Frequency Input error 0X14 after March 11 update
Replies: 2
Views: 7414

Re: DAQ1400 Frequency Input error 0X14 after March 11 update

Thanks for bringing this to our attention.

This is a mostly cosmetic issue with the Control Panel example, and the example should continue to work as intended, despite the reported error.

That said, we have fixed the issue, pending the next release.
by jdecoux
Fri Mar 08, 2024 4:03 pm
Forum: General
Topic: Phidget 1017_2 disconnecting from VINT hub
Replies: 8
Views: 8450

Re: Phidget 1017_2 disconnecting from VINT hub

We have replicated the issue and are working on a fix.
by jdecoux
Fri Feb 02, 2024 1:37 pm
Forum: C#.NET
Topic: Sample project to connect MOT2002
Replies: 4
Views: 12864

Re: Sample project to connect MOT2002

There is a Code Samples tab on the MOT2002 page that allows you to select a programming language and the Hub you are connecting to, which will give you code specific to your use-case to get started.

https://www.phidgets.com/products.php?p ... de_Samples