So it ended up not working for me. I noticed that the drivers here
http://www.ftdichip.com/Drivers/VCP.htm
came out a few years before the 231X chip. Would a newer kernel recognize the chip if the driver is older then the chip or is there another place to get the driver?

So i did what it said and got this. usb 1-1.6: Detected FT232RL usb 1-1.6: Number of endpoints 2 usb 1-1.6: Endpoint 1 MaxPacketSize 64 usb 1-1.6: Endpoint 2 MaxPacketSize 64 usb 1-1.6: Setting MaxPacketSize 64 usb 1-1.6: FTDI USB Serial Device converter now attached to ttyUSB0 usbcore: registered n...

Recently I ordered some devices that have the 231X FTDI chip. When I plug them in I can see the device in the web interface of the SBC. 01 11 FT231X USB UART FTDI 0403:6015 2.00 12 However they do not get attached to a ttyUSB*. I was using devices with the 231R FTDI chip and they attached to a ttyUS...

So I ended up ditching the USB hub and connected the phidgets directly to the computer. (Originally I had the hub so that I only had one USB cord to route out of the control box.) For the past couple of days I haven't any sporadic detaches. Before this I had tried three different hubs and with each ...

I was not the one who wired this device, but I just checked and it looks like the diodes are missing. The ones that are shown to be across the solenoids. I was not able to get any disconnects stress testing the inputs, but when I toggled one of the outputs a few times with out activating any of the ...

I installed event ghost and did some testing. Unplugged 1012: System.DeviceRemoved [u'\\\\?\\HID#VID_06C2&PID_0044#7&228b4ec0&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}'] System.DeviceRemoved [u'\\\\?\\USB#VID_06C2&PID_0044#443987#{a5dcbf10-6530-11d2-901f-00c04fb951ed}'] Plugg...

I'm not sure I didn't think they both were but I will check on Monday. Thanks for the quick help!

I have not tried connecting it directly to the computer yet. I am on my third USB Hub. It's a Tripp-Lite USB 2.0 7 Port powered hub. I am also on my second set of USB cables. I switched to some Amazon Basics cable when I started having this problem. Also this is the second 1012 that I have tried. I ...

Here is the log. I have the program exit when a phidget detaches because bad things can happen if don't. 12/16/16 08:17:11,4032,".\clog.c(82)",INFO,"Enabling logging" 12/16/16 08:17:11,2684,".\windows\cusbwindows.c(391)",INFO,"New Phidget found in CUSBBuildList: \\...

Currently there only there are only two phidgets connected to the powered USB hub. The interface kit and the stepper driver. The hub is connected to a 5v 2.4A power supply. The power supply is connected to 480VAC to 120VAC transformer. All the inputs and outputs use 24V power supply that is also con...