Digital output switching on PhidgetInterfaceKit 0/16/16

Technical Discussions on any InterfaceKits
Post Reply
pdb
Fresh meat
Posts: 1
Joined: Thu Nov 01, 2018 9:47 am
Contact:

Digital output switching on PhidgetInterfaceKit 0/16/16

Post by pdb »

Are the outputs isolated? Or do they share a common ground?

I want to send a 24v signal to a PLC using the outputs.
They are rated to handle 30v.

The inputs on the PLC share a common ground and sinks the current.
The examples I have found all use the common ground on the Phidget outputs.
The Phidget needs to be wired to provide current switch 24v +.
fraser
Engineering
Posts: 324
Joined: Thu Nov 19, 2009 4:41 pm
Contact:

Re: Digital output switching on PhidgetInterfaceKit 0/16/16

Post by fraser »

Yes they share a common ground on the 1012, and REL1101. For switching isolated relays you'd want to look at the

1017
https://www.phidgets.com/?tier=3&catid= ... rodid=1045

or

REL2002
https://www.phidgets.com/?tier=3&catid= ... prodid=723
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest