HI,

I use 1124 - Precision Temperature Sensor without a phidgets kit. I use an arduino to get the data.

I got these numbers :

Pin2: 0.81465201465201464

Pin2: 0.81465201465201464

Pin2: 0.81416361416361416

Pin2: 0.81465201465201464

Pin2: 0.81489621489621489

Pin2: 0.81562881562881562

And I read this from the manual, but I have problems to achieve good results:

==================================================

Formulas

The Formula to translate SensorValue into Temperature is:

Temperature (°C) = (SensorValue x 0.2222) - 61.111

Other Interfacing Alternatives

If you want maximum accuracy, you can use the RawSensorValue property from the PhidgetInterfaceKit. To adjust a

formula, substitute (SensorValue) with (RawSensorValue / 4.095)

If the sensor is being interfaced to your own Analog to Digital Converter and not a Phidget device, our formulas can

be modified by replacing (SensorValue) with (Vin * 200). It is important to consider the voltage reference and input

voltage range of your ADC for full accuracy and range.

==================================================

I tried this :

double v2 = ((pv2 * 200) * 0.2222) - 61.111;

Any help about to convert those reads to a Cº temperatute ?

Many thanks in advance,