Gear supplier for Phidget stepper motors

Any hardware type questions or problems for all other Phidget devices.
johnebbinghaus
Phidgetsian
Posts: 12
Joined: Tue Apr 29, 2008 5:21 am
Location: Denmark
Contact:

Gear supplier for Phidget stepper motors

Postby johnebbinghaus » Thu Apr 14, 2011 4:26 am

I'm looking for sprocket gears Metal or plastic) to fit some Phidget steppers with shaft dia.s of 5, 6.36, and 8 millimeters. The application will use standard 112-link bicycle chains, though this could be changed. I'm in the European Union, but outside suppliers (USA?) are fine.

nikolai
Fresh meat
Posts: 3
Joined: Fri Jun 10, 2011 2:52 am
Location: Denmark
Contact:

Re: Gear supplier for Phidget stepper motors

Postby nikolai » Fri Jun 10, 2011 3:02 am

johnebbinghaus wrote:I'm looking for sprocket gears Metal or plastic) to fit some Phidget steppers with shaft dia.s of 5, 6.36, and 8 millimeters. The application will use standard 112-link bicycle chains, though this could be changed. I'm in the European Union, but outside suppliers (USA?) are fine.


I am looking for the same, you have found a place where you can buy such parts?

johnebbinghaus
Phidgetsian
Posts: 12
Joined: Tue Apr 29, 2008 5:21 am
Location: Denmark
Contact:

Re: Gear supplier for Phidget stepper motors

Postby johnebbinghaus » Fri Jun 10, 2011 12:34 pm

Hello Nikolai, I found some at http://www.robotmarketplace.com/product ... in_25.html. The 1/4" bore should fit the 6.36mm phidgets shafts. I haven't ordered any yet though...
Hvor er du henne i Kongeriget, og hvad laver du med Phidgets?

nikolai
Fresh meat
Posts: 3
Joined: Fri Jun 10, 2011 2:52 am
Location: Denmark
Contact:

Re: Gear supplier for Phidget stepper motors

Postby nikolai » Tue Jun 14, 2011 1:04 am

Many thanks, just what I searched:)

Jeg kommer fra Viborg og er igang med en selvkørende vogn til hærvejsmarchen.

Hvad med dig, hvor i landet befinder du dig, og hvad er du ved at stykke sammen :)


Return to “All Other Phidgets”

Who is online

Users browsing this forum: No registered users and 0 guests