Changing Reference Output voltage on 8/8/8 from 5V to 3.3V

Technical Discussions on any InterfaceKits
Post Reply
vreinha
Fresh meat
Posts: 2
Joined: Fri Aug 28, 2020 11:23 am
Contact:

Changing Reference Output voltage on 8/8/8 from 5V to 3.3V

Post by vreinha »

Hi,
I think I know the answer already but I will ask. I looked through the forums but didn't see an answer for this one. On the 8/8/8 Digital Outputs, is it possible to change the reference ouput voltage. That is make the output 3.3V instead of 5V. I think I might have order the wrong hardware.

Would a voltage divider on every pin work as well as long as the current is low?

Regards,
V
Attachments
Output Voltage Divider
Output Voltage Divider
Phidget Voltage.png (18.38 KiB) Viewed 12078 times
vreinha
Fresh meat
Posts: 2
Joined: Fri Aug 28, 2020 11:23 am
Contact:

Re: Changing Reference Output voltage on 8/8/8 from 5V to 3.3V

Post by vreinha »

I think I had the wrong circuit. I will try the following to get 2.5V output.
-V
Attachments
Phidget Voltage Divider.png
Phidget Voltage Divider.png (19.16 KiB) Viewed 12056 times
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests