RC Servo Phidget to all support live position updates and manipulatable voltage output levels

What do you need Phidgets to do for you?
Post Reply
Rhybot
Phidgeteer!
Posts: 52
Joined: Wed Aug 14, 2019 4:58 pm
Contact:

RC Servo Phidget to all support live position updates and manipulatable voltage output levels

Post by Rhybot »

Currently for RC servos, there is the:

RCC1000_0
- Can specify 5.0, 6.0, or 7.4 Vdc power
- Per viewtopic.php?f=5&t=9862#p31367, can only get position when arrived

RCC0004_0
- Can only supply 5.0 Vdc power
- Per viewtopic.php?f=5&t=9862#p31367, can get position during motion

Currently, I have an application that needs both options. I use the RCC0004_0 and clip the red wire in the servo's wires. I then splice in my own 7.4 Vdc PSU to get the desired supply voltage.

It would be nice if both boards could support both functionalities, or at least RCC0004_0 supports both functionalities.
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests