Phidget Steppers disconnecting?

Comments & issues
Post Reply
josh.williams
Fresh meat
Posts: 4
Joined: Fri Mar 27, 2020 7:23 pm
Contact:

Phidget Steppers disconnecting?

Post by josh.williams »

Hello,

I am running a number of Phidget devices connected to a VINT Hub.

I have:
  • 2 of 4A Phidget Steppers (STC1003_0)
    1 of 2x DC Motor Phidget (DCC1003_0)
    1 of Barometer Phidget (PRE1000_0)
    1 of Differential Air Pressure Sensor (1126_0)
    1 of 8x Voltage Input Phidget (DAQ1000_0), with 2 of IR Reflective Sensor (1146_0) connected to it.
I keep running into an issue where one of my steppers will time out and cause my program to fail.

I am using failsafe timers on my stepper and DC motor Phidgets, and have them set to 10 seconds. The timers are reset every ~1 second.

Only my stepper Phidgets seem to time out, never the DC motor Phidgets.

Does anyone have any ideas why this may be happening, and how to fix it?

Thanks,
Josh
Post Reply

Who is online

Users browsing this forum: No registered users and 18 guests