Digital output switching on PhidgetInterfaceKit 0/16/16
Posted: Thu Nov 01, 2018 10:03 am
Are the outputs isolated? Or do they share a common ground?
I want to send a 24v signal to a PLC using the outputs.
They are rated to handle 30v.
The inputs on the PLC share a common ground and sinks the current.
The examples I have found all use the common ground on the Phidget outputs.
The Phidget needs to be wired to provide current switch 24v +.
I want to send a 24v signal to a PLC using the outputs.
They are rated to handle 30v.
The inputs on the PLC share a common ground and sinks the current.
The examples I have found all use the common ground on the Phidget outputs.
The Phidget needs to be wired to provide current switch 24v +.