Page 1 of 1

0/16/16 Board - ouput not generating any power

Posted: Wed Jan 21, 2009 10:58 am
by skeith99
I just bought the 0/16/16 board and I am unable to get the outputs to work. I am running the Interface Full app and I inserted a ground and wire and a live wire in the 0 output. When I click on the first check box the LED light comes on, but nothing happens in the device, an RC controller, I've connected the wires to.

I then ran the wires from the output to the input slots. My thinking is that if the output is generating a signal, the input led should light up. It does not. So this tells me the output is not generating a signal.

What am I missing :D

thanks in advance.

Posted: Wed Jan 21, 2009 12:14 pm
by fitchett
0/16/16 outputs are switch to ground. Documented in the product manual.

Chester