0/16/16 Board - ouput not generating any power

Technical Discussions on any InterfaceKits
skeith99

0/16/16 Board - ouput not generating any power

Postby skeith99 » Wed Jan 21, 2009 10:58 am

I just bought the 0/16/16 board and I am unable to get the outputs to work. I am running the Interface Full app and I inserted a ground and wire and a live wire in the 0 output. When I click on the first check box the LED light comes on, but nothing happens in the device, an RC controller, I've connected the wires to.

I then ran the wires from the output to the input slots. My thinking is that if the output is generating a signal, the input led should light up. It does not. So this tells me the output is not generating a signal.

What am I missing :D

thanks in advance.

fitchett
Site Admin
Posts: 263
Joined: Fri Dec 05, 2003 3:45 pm
Location: Canada
Contact:

Postby fitchett » Wed Jan 21, 2009 12:14 pm

0/16/16 outputs are switch to ground. Documented in the product manual.

Chester


Return to “InterfaceKits”

Who is online

Users browsing this forum: No registered users and 1 guest