A new PhidgetSBC2 Firmware has been posted.
This release upgrades the kernel to 3.1.6, as well as including all of the latest Debian package updates and the latest Phidgets libraries.You should only perform this upgrade if you want the newer kernel - all packages can be upgraded via the package system.
This upgrade is available from the Drivers
This must be installed from the recovery system and will completely overwrite the SBC2 filesystem, so backup any files before hand.
To upgrade:1. Rename the firmware file from phidgetsbc2_18.104.22.16820106.bin to phidgetsbc2-22.214.171.12420106.bin
- the recovery system expects a dash not an underscore.
2. Put the file on a USB flash drive and plug it in.
3. Reboot into the recovery system: 'System->Backup & Restore->Upgrade / Factory Reset'
4. Make sure the right file is shown and click 'Upgrade'
The SBC2 will upgrade the system and reboot.