Page 1 of 1

Creating an Excel datalogger for PhidgetBridge

Posted: Thu Nov 12, 2015 4:18 pm
by hudsonas
So I am trying to create an excel file that will record the output values from four (3137) load cells attached to a (1046) PhidgetBridge. So basically once the bridge is activated I want four columns to fill with measurements taken every tenth of a second for about 20 seconds, with each load cell corresponding to a single column. I don't have experience with coding in visual basic or C++, so I am having quite a bit of trouble. Any assistance would be greatly appreciated.


Re: Creating an Excel datalogger for PhidgetBridge

Posted: Mon Nov 16, 2015 9:08 am
by mparadis
You might want to read our data logging application note for some direction. Combine this with sample code for the PhidgetBridge.

If you're having trouble with C/C++ in general, I would recommend sitting down with a friend that knows how to program and work through some of the sample code just to understand what's going on.