I've downloaded and compiled the Visual C++ examples, and have successfully compiled the precision temperature sensor example. However when I run the example, it cannot detect the sensor despite the fact that it's obviously attached. But yet when I use the Phidgets Control Panel, it can detect both the 8/8/8 board and the temperature sensor just fine. The sensor works great too.
I've checked and rechecked my project settings, and tried alternating between phidgets21.lib and phidgets21_x86.lib (I know they're probably the same, but I thought it's worth a try). Nothing works. I'm running Visual C++ 2008 and the Phidets 8/8/8 interface board.
Any help would be most appreciated.