Thanks again for your quick reply.
Yes I understood this solution was for using 2 or more boards at the same time.
That's exactly what I tried with the phidgetStepper patch, I copied/paste the whole example in order to use 2 boards in the same patch.
it didn't work, don't know why.
If i use one object in a patch, everything is ok, but I'm only able to control the steppers one by one...
Just to check whether I'm misleading or not:
For example: In order to control the stepper 1 and the stepper 2 of a first board, do I have to copy the phidget object anyway? keeping the the same serial attribute in both?
here is my example in max 5.
in red: 2 objects controlling two different steppers plugged on a first 1062 board
in green: 2 objects controlling two different steppers on an other board.
Am I right?
edit: attached file seems to be too heavy
here is a link:http://5img.com/vimg51/8566/17phidgetstepper.jpg