current limit for phidget bipolar in max

Supporting Max/MSP versions 6 and up
Gosse

current limit for phidget bipolar in max

Postby Gosse » Thu Sep 24, 2009 4:52 am

Dear Patrick,

Thanks a lot for fix this problem so fast !!!
It is very helpfull and I really appreciate this.

Two more small questions:

How does the scale of the currentlimit number in max relate to actual current? (in the driver you can define your maximum current limit by looking at the current slider) So I can use the driver to define the maximum current, but how do translate this current to the numberbox in max?

The maximum velocity in the max patch is much lower than the maximum speed in the driver. Can I just scale the slider in the max patch to obtain higher velocities?

Again, thanks !
Gosse

ps I will informe you when the project is finished. So you can see how your technology has been used :-)

User avatar
Patrick
Lead Developer
Posts: 3099
Joined: Mon Jun 20, 2005 8:46 am
Location: Canada
Contact:

Re: current limit for phidget bipolar in max

Postby Patrick » Thu Sep 24, 2009 10:08 am

Hi,

Yes, you can just scale the slider - the maximum velocity for the bipolar dirver is 32768 (16th steps/second). The Max .help file is really just an example. The current limit is in Amps, and this value must be in the range of 0.0542 - 2.492.

-Patrick


Return to “Max/MSP”

Who is online

Users browsing this forum: No registered users and 1 guest