DAQ1500 getVoltageRatio()

Supporting 2.7 and 3.2+
Post Reply
MarioEduardo
Fresh meat
Posts: 1
Joined: Mon Dec 28, 2020 4:14 am
Contact:

DAQ1500 getVoltageRatio()

Post by MarioEduardo »

I have no idea what getVoltageRatio()returns.
IMHO it has nothing to do with the register of the ADS1232.

What function is applied to the value of the register ?
i did yesterday a measurement of various voltages with the
DAQ1500 and a RIGOL and i am curious about the connex.


E.g. a voltage of 99.039 mV returns a value of 0.01954 from getVoltageRatio(). The ratio of Vin / getVoltageRatio() is about
5100 in the range of 1000mV down to 20mV.

A Uref of 5.047V (in my case) with a resolution of 23Bit (because of the sign) gives 0.000601649 mV per bit, thus expecting round about 164613
from getVoltageRatio() .


Pls enlight me ...
Mario
fraser
Engineering
Posts: 324
Joined: Thu Nov 19, 2009 4:41 pm
Contact:

Re: DAQ1500 getVoltageRatio()

Post by fraser »

getVoltageRatio() does not return a register value, it returns the voltage ratio, ie Vin / Vref.

0.099039V/5.047V = 0.019623V/V
Post Reply

Who is online

Users browsing this forum: No registered users and 18 guests