backlash specification

Any hardware type questions or problems for all other Phidget devices.
greg77
Fresh meat
Posts: 1
Joined: Fri Feb 15, 2013 7:28 pm
Contact:

backlash specification

Postby greg77 » Fri Feb 15, 2013 7:36 pm

Hi Folks,
I have noticed the backlash specification for all the planetary DC gear motors seems to be missing. Does anyone have specifications for the backlash on the phidgets gear motors. I'm specifically intersted in the "3272E_0 - 24V/50.9Kg-cm/53RPM 47:1 DC Gear Motor w/Encoder" or similar.

Backlash is a rather critical specification for any robotic application. I'm guessing its of the order of a few degrees(aka not very good) and hence that's why its missing? I hope I'm wrong because otherwise the motor specifications look quiet good.

Regards
Greg

User avatar
burley
Human-Cyborg Relations
Posts: 441
Joined: Tue Sep 27, 2011 2:37 pm
Location: Calgary
Contact:

Re: backlash specification

Postby burley » Tue Feb 19, 2013 8:39 am

Cant really say for sure but I seem to recall the manufacturers putting the number in the ballpark of 3 degrees as the absolute worst-case scenario.
Brian Burley
403-282-7335 ext. 6003
support@phidgets.com


Return to “All Other Phidgets”

Who is online

Users browsing this forum: No registered users and 1 guest