Page 1 of 1

1024_0 - PhidgetRFI

Posted: Sun Jun 22, 2014 12:15 pm
by jose15
Puedo conectar varios dispositivos 1024_0 - PhidgetRFID Read-Write a un solo computador?
Donde hay un ejemplo…
Mil gracias.

I can connect multiple devices 1024_0 - PhidgetRFID Read-Write to a single computer?
Where there is an example ...
Thank you

Re: 1024_0 - PhidgetRFI

Posted: Mon Jun 23, 2014 7:23 am
by mparadis
Yes, you can connect multiple 1024 to the same computer and control them in the same program.

For a list sample code in a variety of languages, check the Software Overview page on our wiki. For a general guide on using multiple Phidgets, there is a section in the General Phidget Programming guide.

Also, if you are planning on using multiple RFID readers, placing them too close together will cause interference when reading tags. You could work around this problem by rapidly "polling" each 1024 by turning the antenna on, checking for tags, and then turning it off in sequence. Of course, this will lengthen the amount of time it takes for your system to read a tag, since you may have to wait for the nearest reader to become active.