Device # identification.

The data to send. The array must start and end with a pulse and each element is a positive time in us.

The length of the data array. Maximum length is 1024, but streams should be kept much shorter, ie. < 100ms between gaps.

The Carrier Frequency in Hz. leave as 0 for default.

The Duty Cycle (10-50). Leave as 0 for default.

The gap time in us. This guarantees a gap time (no transmitting) after the data is sent, but can be set to 0.

Describes error conditions that occur before this node runs.

Output

Same as the Device In.

Contains error information.