Template:UgFrequencyCounter: Difference between revisions

Latest revision as of 23:42, 19 June 2017

Double-click on the Frequency Counter object in order to run the example: [[Image:{{{1}}}_FrequencyCounter_Example.jpg|center|link=]]

General information about the selected object will be displayed at the top of the window. You can also experiment with the following functionality:

Frequency: the average frequency calculated from the pulses in the event so far.
Total Count: the total number of pulses since opening the example.
Total Time: the total time in milliseconds that has elapsed since opening this example.
Enter a cutoff frequency in the Frequency Cutoff(Hz) textbox and the {{{1}}} will ignore frequencies below the specified value.

@@ Line 5: / Line 5: @@
 {{UGExampleDescription}}
-*Toggle the ''Enabled'' checkbox to enable/disable the {{{1}}}.
+*'''Frequency:''' the average frequency calculated from the pulses in the event so far.
-*Enter a ''Frequency Cutoff(Hz)'' and the {{{1}}} will ignore frequencies below the specified value.
+*'''Total Count:''' the total number of pulses since opening the example.
-*Enter a filter type from the ''Filter Type'' drop-down menu. A ''Logic Level'' signal goes from alternates between 0 and VCC. A ''Zero Crossing'' signal goes from -VCC to VCC.
+*'''Total Time:''' the total time in milliseconds that has elapsed since opening this example.
-*Modify the data interval value by dragging the slider. For more information on this setting, see the [[Data_Rate_and_Change_Trigger|data interval]] page.
+*Enter a cutoff frequency in the ''Frequency Cutoff(Hz)'' textbox and the {{{1}}} will ignore frequencies below the specified value.
-*Frequency data is described:
-**'''Frequency:''' the average frequency calculated from the pulses in the event so far.
-**'''Total Count:''' the total number of pulses since opening the example.
-**'''Total Time:''' the total time in milliseconds that has elapsed since opening this example.
-<br clear="all">