SAF1000 User Guide: Difference between revisions

From Phidgets Support
No edit summary
Line 33: Line 33:
{{ugAddressingInformation}}
{{ugAddressingInformation}}


{{ugUsingYourOwnProgram|This Phidget is compatible with the following examples:
{{ugUsingYourOwnProgram|SAF1000}}
* {{ExampleLink|PowerGuard}}
* {{ExampleLink|VoltageInput}}
* {{ExampleLink|TemperatureSensor}}
}}


{{UGnext|}}
{{UGnext|}}

Revision as of 16:39, 17 October 2019


Getting Started

Welcome to the SAF1000 user guide! In order to get started, make sure you have the following hardware on hand:

Next, you will need to connect the pieces:

SAF1000 Functional.jpeg
  1. Connect the SAF1000 to your VINT Hub using the Phidget cable.
  2. Connect the VINT Hub to your computer using the USB cable.
  3. Connect the positive power terminal of the device you're powering to the "OUT" terminal on the SAF1000.
  4. Connect the ground terminal of the device you're powering to the ground terminal on the SAF1000.
  5. Connect the positive and negative wires of your power supply to the "Vin" and "GND" terminals of the SAF1000, respectively.
  6. Plug in your power supply.


Using the SAF1000

Phidget Control Panel

In order to demonstrate the functionality of the SAF1000, the Phidget Control Panel running on a Windows machine will be used.


The Phidget Control Panel is available for use on both macOS and Windows machines.

Windows

To open the Phidget Control Panel on Windows, find the Ph.jpg icon in the taskbar. If it is not there, open up the start menu and search for Phidget Control Panel

Windows PhidgetTaskbar.PNG

macOS

To open the Phidget Control Panel on macOS, open Finder and navigate to the Phidget Control Panel in the Applications list. Double click on the Ph.jpg icon to bring up the Phidget Control Panel.


For more information, take a look at the getting started guide for your operating system:


Linux users can follow the getting started with Linux guide and continue reading here for more information about the SAF1000.

First Look

After plugging the SAF1000 into your computer and opening the Phidget Control Panel, you will see something like this:

SAF1000 Panel.jpg


The Phidget Control Panel will list all connected Phidgets and associated objects, as well as the following information:

  • Serial number: allows you to differentiate between similar Phidgets.
  • Channel: allows you to differentiate between similar objects on a Phidget.
  • Version number: corresponds to the firmware version your Phidget is running. If your Phidget is listed in red, your firmware is out of date. Update the firmware by double-clicking the entry.


The Phidget Control Panel can also be used to test your device. Double-clicking on an object will open an example.

Power Supply Protector

Double click on the Power Supply Protector object in order to run the example:

SAF1000 DigitalInput Example.jpg

General information about the selected object will be displayed at the top of the window. You can also experiment with the following functionality:

  • Adjust the voltage cutoff slider to determine at which voltage the SAF1000 will cut power to your system.
  • Select the fan mode- on, off, or auto (automatically turns on when board reaches 70°C, turns off after dropping below 55°C)
  • Click the enabled box once the cutoff and fan mode are set in order to activate the SAF1000.

Temperature Sensor

Double-click on the Temperature Sensor object , labelled Temperature Sensor, in order to run the example:

SAF1000 TemperatureSensorIC Example.jpg


General information about the selected object will be displayed at the top of the window. You can also experiment with the following functionality:

  • Modify the change trigger and/or data interval value by dragging the sliders. For more information on these settings, see the data interval/change trigger page.
  • The measured temperature can be seen next to the Temperature label. Cover the board with your hands to see the temperature quickly rise.


Supply Voltage Input

Double-click on a Supply Voltage Input object in order to run the example:

SAF1000 VoltageInputSupply Example.jpg

General information about the selected object will be displayed at the top of the window. You can also experiment with the following functionality:

  • At the top of the window, information about your device and the properties of this particular channel will be listed.
  • On the left, change trigger and/or data interval can be changed. For more information on these settings, see the Data Rate/Change Trigger page.
  • On the right, the supply voltage of the Phidget is displayed in real-time.


Finding The Addressing Information

Before you can access the device in your own code, and from our examples, you'll need to take note of the addressing parameters for your Phidget. These will indicate how the Phidget is physically connected to your application. For simplicity, these parameters can be found by clicking the button at the top of the Control Panel example for that Phidget.

The locate Phidget button is found in the device information box

In the Addressing Information window, the section above the line displays information you will need to connect to your Phidget from any application. In particular, note the Channel Class field as this will be the API you will need to use with your Phidget, and the type of example you should use to get started with it. The section below the line provides information about the network the Phidget is connected on if it is attached remotely. Keep track of these parameters moving forward, as you will need them once you start running our examples or your own code.

All the information you need to address your Phidget

Using Your Own Program

You are now ready to start writing your own code for the device. The best way to do that is to start from our Code Samples.

Select your programming language of choice from the drop-down list to get an example for your device. You can use the options provided to further customize the example to best suit your needs.

Code Sample Choose Language.png


Once you have your example, you will need to follow the instructions on the page for your programming language to get it running. To find these instructions, select your programming language from the Programming Languages page.

What to do Next

  • Programming Languages - Find your preferred programming language here and learn how to write your own code with Phidgets!
  • Phidget Programming Basics - Once you have set up Phidgets to work with your programming environment, we recommend you read our page on to learn the fundamentals of programming with Phidgets.