Language - C Sharp

The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Quick Downloads

Documentation

Phidget22 API (Select C# from drop-down menu)

Example Code

C# Examples

Libraries

Nuget

The Phidget22.NET library is now available on nuget.org here. Nuget is the recommended way to install and use the .NET library. The nuget package bundles the C library on Windows, so there are no other prerequisites that need to be installed. The nuget package adds targets for .NET Core and .NET Standard, so it should be usable from almost any .NET environment which also supports the C library.

Getting Started with C#

Welcome to using Phidgets with C#! By using C#, you will have access to the complete Phidget22 API, including events. We also provide example code in C# for all Phidget devices.

If you are developing for Windows, keep reading. Otherwise, select your operating system to jump ahead:

macOS
Linux

Windows

If you haven't already, please visit the Windows page before you continue reading. There you will be instructed on how to properly set up your Windows machine so you can follow the guides below!

Visual Studio

Use Our Examples

One of the best ways to start programming with Phidgets is to use our example code as a guide. In order to run the examples, you will need to download and install Microsoft Visual Studio.

Now that you have Microsoft Visual Studio installed, select an example that will work with your Phidget:

C# Examples

Open the example project and start the example by pressing the Start button:

The application will open the Phidget, list basic information about the Phidget, and demonstrate the Phidget's functionality. Here is an example of a Digital Output channel on a RFID Phidget:

You should now have the example up and running for your device. Play around with the device and experiment with some of the functionality. When you are ready, the next step is configuring your project and writing your own code!

VINT Hub

If you are trying to connect to one of the VINT hub ports directly rather than to a VINT device connected through a VINT hub then there is one additional step. There is a isHubPort property of the Phidget class that must be set before calling open. It defaults to false but in this case it will need to be set to true. In our examples this is done via command line though in practice you can just set it before calling open. To add command line parameters to your project in Visual Studio, you can go to the Project->Properties screen. Under the Debug section there is a field to enter command line parameters for startup. Use "-h" to make sure isHubPort is set before open is called and then you should be good to go.

Csharp visualstudio commandLineParameters.png

Configure Your Project

When you are building a project from scratch, or adding Phidget functionality to an existing project, you'll need to configure your development environment to properly link the Phidget .NET library. To begin:

Create a new Windows Forms Application project:

Next, right-click to add a reference to the Phidget .NET library:

On the following screen, click Browse... and navigate to the location of Phidget22.NET.dll:

C:\Program Files\Phidgets\Phidget22\Phidget22.NET.dll

Finally, to include the Phidget .NET library, add the following lines to main window class file:

using Phidget22;
using Phidget22.Events;

Success! The project now has access to Phidgets. Next, view the write your own code section located below.

Mono

Use Our Examples

One of the best ways to start programming with Phidgets is to use our example code as a guide. In order to run the examples, you will need to download and install Mono for Windows.

Now that you have Mono installed, download and unpack the HelloWorld example for C#:

HelloWorld example

Note: The HelloWorld example is compatible with Mono because it does not use Windows Forms. All other C# examples use Windows Forms.

Next, copy Phidget22.NET.dll from type the following location:

C:\Program Files\Phidgets\Phidget22\Phidget22.NET.dll

Place both the HelloWorld example and the Phidget22.NET.dll file in the same location. Your folder should now look something like this:

Open the command prompt at the folder location and enter the following command:

mcs /r:Phidget22.NET.dll Program.cs

This will create an executable file called Program.exe. Type in the following command to run the example:

mono Program.exe

You should now have the example up and running. When you are ready, the next step is configuring your project and writing your own code!

Configure Your Project

When you are building a project from scratch, or adding Phidget functionality to an exisiting project, you'll need to configure your development environment to properly link the Phidget .NET library.

To include the Phidget .NET library, simply add the following lines to your code:

using Phidget22;
using Phidget22.Events;

You can now compile the file as shown in the previous section.

The project now has access to Phidgets. Next, view the write your own code section located below.

MonoDevelop/Xamarin Studio

Use Our Examples

One of the best ways to start programming with Phidgets is to use our example code as a guide. In order to run the examples, you will need to download and install Xamarin Studio for Windows.

Now that you have Xamarin Studio installed, select an example that will work with your Phidget:

C# Examples

Next, open the example project:

Right click the project, and click Run Item:

The application will open the Phidget, list basic information about the Phidget, and demonstrate the Phidget's functionality. Here is an example of a Digital Output channel on a RFID Phidget:

You should now have the example up and running for your device. Play around with the device and experiment with some of the functionality. When you are ready, the next step is configuring your project and writing your own code!

Configure Your Project

When you are building a project from scratch, or adding Phidget function calls to an existing project, you'll need to configure your development environment to properly link the Phidget .NET library. To begin:

Create a new .NET project:

Next, add a reference to the Phidget .NET library:

On the following screen, select Phidget22.NET.dll:

Finally, to include the Phidget .NET library, add the following lines to main window class file:

  using Phidget22;
  using Phidget22.Events;

Success! The project now has access to Phidgets. Next, view the write your own code section located below.

macOS

If you haven't already, please visit the macOS page before you continue reading. There you will be instructed on how to properly set up your macOS machine so you can follow the guides below!

Mono

Use Our Examples

One of the best ways to start programming with Phidgets is to use our example code as a guide. In order to run the examples, you will need to download and install Mono for macOS. You will also need a copy of Phidget22.NET.dll.

Now that you have Mono installed and Phidget22.NET.dll on hand, download and unpack the HelloWorld example for C#:

HelloWorld example download

Note: The HelloWorld example is compatible with Mono because it does not use Windows Forms. All other C# examples use Windows Forms.

Finally, you need to create a configuration file. Create a new file in the same directory as the example you wish to compile and name it Phidget22.NET.dll.config. Copy the content below to the file.

  <configuration>
  <dllmap dll="phidget22.dll" target="/Library/Frameworks/Phidget22.framework/Versions/Current/Phidget22" />
  </configuration>

Your project folder should now look like this:

To compile the program, enter the following command in the terminal:

mcs Program.cs -r:Phidget22.NET.dll

An executable file will be created. Run the program using mono:

mono Program.exe

You should now have the example up and running for your device. Play around with the device and experiment with some of the functionality. When you are ready, the next step is configuring your project and writing your own code!

Configure Your Project

When you are building a project from scratch, or adding Phidget functionality to an exisiting project, you'll need to configure your development environment to properly link the Phidget .NET library.

To include the Phidget .NET library, simply add the following lines to your code:

using Phidget22;
using Phidget22.Events;

You can now compile the file as shown in the previous section.

The project now has access to Phidgets. Next, view the write your own code section located below.

Linux

If you haven't already, please visit the Linux page before you continue reading. There you will be instructed on how to properly set up your Linux machine so you can follow the guides below!

Mono

Use Our Examples

One of the best ways to start programming with Phidgets is to use our example code as a guide. In order to run the examples, you will need to download and install Mono. You can do this by entering the following command in the terminal:

apt-get install mono-complete

You will also need a copy of Phidget22.NET.dll.

Now that you have Mono installed and Phidget22.NET.dll on hand, download and unpack the HelloWorld example for C#:

HelloWorld example download

Note: The HelloWorld example is compatible with Mono because it does not use Windows Forms. All other C# examples use Windows Forms.

Your project folder should now look like this:

Finally, to compile the program, enter the following command in the terminal:

mcs Program.cs -r:Phidget22.NET.dll

An executable file will be created. Run the program using mono:

mono Program.exe

You should now have the example up and running for your device. Play around with the device and experiment with some of the functionality. When you are ready, the next step is configuring your project and writing your own code!

Configure Your Project

When you are building a project from scratch, or adding Phidget functionality to an exisiting project, you'll need to configure your development environment to properly link the Phidget .NET library.

To include the Phidget .NET library, simply add the following lines to your code:

using Phidget22;
using Phidget22.Events;

You can now compile the file as shown in the previous section.

The project now has access to Phidgets. Next, view the write your own code section located below.

Write Code

By following the instructions for your operating system and compiler above, you now have working examples and a project that is configured. This teaching section will help you understand how the examples were written so you can start writing your own code.

Remember: your main reference for writing C# code will be the Phidget22 API Manual and the example code.

Step One: Initialize and Open

You will need to declare your Phidget object in your code. For example, we can declare a digital input object like this:

DigitalInput ch;

Next, the Phidget object needs to be initialized and opened:

ch = new DigitalInput();
ch.Open();

Although we are not including it on this page, you should include error handling for all Phidget functions. Here is an example of the previous code with error handling:

try{
  ch = new DigitalInput();
  ch.Open();
}catch(PhidgetException ex){
  Console.WriteLine("Error: " + ex.Description);
}

Step Two: Wait for Attachment of the Phidget

Simply calling open does not guarantee you can use the Phidget immediately. To use a Phidget, it must be plugged in (attached). We can handle this by using event driven programming and tracking the attach events. Alternatively, we can modify our code so we wait for an attachment:

ch = new DigitalInput();
ch.Open(5000); //wait for attach for 5 seconds, if not time out

Waiting for attachment will block indefinitely until a connection is made, or until the timeout value is exceeded.

To use events, we have to modify our code slightly:

ch = new DigitalInput();
ch.Attach += onAttachHandler;
ch.Open();

Next, we have to declare the function that will be called when an attach event is fired - in this case the function onAttachHandler will be called.

void onAttachHandler (object sender, Phidget22.Events.AttachEventArgs e){
  attachedText.Text = "Attached";
}

Step Three: Do Things with the Phidget

We recommend the use of event driven programming when working with Phidgets. In a similar way to handling an attach event as described above, we can also add an event handler for a state change event:

ch = new DigitalInput();
ch.Attach += onAttachHandler;
ch.StateChange += onStateChangeHandler;
ch.Open();

This code will connect a function and an event. In this case, the onStateChangeHandler function will be called when there has been a change to the devices input. Next, we need to create the onStateChangeHandler function:

void onStateChangeHandler(object sender, Phidget22.Events.DigitalInputStateChangeEventArgs e) {
    stateText.Text = "State: " + e.State;
}

If events do not suit your needs, you can also poll the device directly for data using code like this:

stateText.Text = "State: " + ch.State;

Step Four: Close and Delete

At the end of your program, be sure to close your device.

ch.Close()

Personal tools

Views

More

Tools

Language - C Sharp

Contents

Quick Downloads

Documentation

Example Code

Libraries

Nuget

Getting Started with C#

Windows

Visual Studio

Use Our Examples

VINT Hub

Configure Your Project

Mono

Use Our Examples

Configure Your Project

MonoDevelop/Xamarin Studio

Use Our Examples

Configure Your Project

macOS

Mono

Use Our Examples

Configure Your Project

Linux

Mono

Use Our Examples

Configure Your Project

Write Code

Step One: Initialize and Open

Step Two: Wait for Attachment of the Phidget

Step Three: Do Things with the Phidget

Step Four: Close and Delete

Further Reading

Navigation menu