Language - C SBC Linux GCC: Difference between revisions

From Phidgets Support
No edit summary
No edit summary
Line 19: Line 19:
If you are ready to go, the first step will be deciding how you will use the SBC:
If you are ready to go, the first step will be deciding how you will use the SBC:
*Use a more powerful external computer to develop your code, and then simply copy the files to the SBC.
*Use a more powerful external computer to develop your code, and then simply copy the files to the SBC.
*Use the SBC like any other Linux computer, by connecting a monitor and a keyboard and programming from the terminal.
*Use the SBC like any other Linux computer, simply connect a monitor and a keyboard and begin your development.




Line 32: Line 32:


===Installing Packages for Development===
===Installing Packages for Development===
At this point you have connected to the SBC through one or more these three options:
At this point you have connected to the SBC through one or more of these three options:
*SBC Web Interface
*SBC Web Interface
*SSH
*SSH
Line 39: Line 39:
Now that you are connected, you may want to start developing on/for the SBC. Before you do this, you need to install some packages.
Now that you are connected, you may want to start developing on/for the SBC. Before you do this, you need to install some packages.


The simplest way to install C support on the SBC is via the install buttons on located on the SBC Web Interface (System->Packages). Check ''Include full Debian Package Repository'' before installing.
The simplest way to install C support on the SBC is by using the install buttons on located on the SBC Web Interface (System->Packages). Check ''Include full Debian Package Repository'' before installing.




Line 46: Line 46:
You're now ready to begin programming! Continue through this guide for code examples and directions on where to go next.
You're now ready to begin programming! Continue through this guide for code examples and directions on where to go next.


==Use Our Examples==
{{Finding Code Samples|C}}
'''''For simplicity, if you have not used Phidgets before, we recommend trying them out directly on an external development machine like a desktop computer. For C development, check the [[Language_-_C_Windows_GCC|GCC (Windows)]], [[Language_-_C_macOS_GCC|GCC (MacOS)]], or [[Language_-_C_Linux_GCC|GCC (Linux)]] page, depending on your operating system.'''''


One of the best ways to start programming with Phidgets is to use our example code as a guide.
==Setting up a New Project==
 
'''''For simplicity, if you have not used Phidgets before, we recommend first trying them out directly on an external development machine like a desktop computer. For C development, check the [[Language_-_C_Windows_GCC|GCC (Windows)]], [[Language_-_C_macOS_GCC|GCC (MacOS)]], and [[Language_-_C_Linux_GCC|GCC (Linux)]] pages.'''''
Select an example that will work with your Phidget:
*{{SampleCode|C|C Examples}}
 
When developing on an external computer, you will write, compile, and test your programs on that machine. When you are ready, you will then upload your programs to the SBC to compile and run them.
 
Follow these steps to get our examples running on an SBC:
 
1. Download the example files onto the development machine.


2. Using the SBC Web Interface, create a new project:
[[File:Phidgetsbc_createproject.PNG|link=|alt=|center]]
3. Transfer all the example files from the development machine to the SBC, either using the SBC Web Interface or a tool like [https://winscp.net/eng/download.php WinSCP].
4. Use [[#SSH|SSH]] to access the SBC terminal
5. Navigate to the project folder using the command:
<syntaxhighlight lang=bash>
cd /usr/userapps/ProjectName
</syntaxhighlight>
6. Compile the example by entering the following command in the terminal:
<syntaxhighlight lang='bash'>
gcc example.c ../Common/PhidgetHelperFunctions.c -o example -I../Common -lphidget22
</syntaxhighlight>
7. You can now run the program with the command:
<syntaxhighlight lang='bash'>
./example
</syntaxhighlight>
Success! The example is running on your SBC. If you aren't interested in developing directly on the Phidget SBC, jump ahead to [[#Running a program automatically|running a program automatically]].
{{Edit_the_Examples}}
==Editing the Examples==
{{Language_-_C_Editing_The_Examples}}
==Setting up a New Project==
When you are building a project from scratch, or adding Phidget functionality to an existing project, you'll need to configure your development environment to properly link the Phidget C library.
When you are building a project from scratch, or adding Phidget functionality to an existing project, you'll need to configure your development environment to properly link the Phidget C library.


When developing on an external computer, you will write, compile, and test your programs on that machine. When you are ready, you will then upload your programs to the SBC to compile and run them.
When developing on an external computer, you will write, compile, and test your programs on that machine. When you are ready, you will then upload your programs to the SBC to compile and run them.


To include the Phidget C library, add the following line to your code:
<syntaxhighlight lang='C'>
#include <phidget22.h>
</syntaxhighlight>


Once your code is written, follow these steps to get your program running on the SBC:
Once your code is written, follow these steps to get your program running on the SBC:

Revision as of 21:21, 16 October 2019

Language - C

SBC Linux with GCC

Welcome to using Phidgets with C! By using C, you will have access to the complete Phidget22 API, including events.

GCC is a compiler system for originally written for GNU, and is the standard compiler on unix-like operating systems like Linux. It allows compilation of C programs from the command line.

Getting Started With the Phidget SBC

Welcome to using the Phidget SBC. If you haven't already, check out the user guide in order to set up the following:

  • Networking
  • Administrator password


If you are ready to go, the first step will be deciding how you will use the SBC:

  • Use a more powerful external computer to develop your code, and then simply copy the files to the SBC.
  • Use the SBC like any other Linux computer, simply connect a monitor and a keyboard and begin your development.


This guide will cover development using an external machine. For development using the SBC itself, check the GCC (Linux) page.

To begin, this video will help you get started:


Developing with an External Computer

There are two main ways in which you can access your SBC from an external computer:

  • SBC Web Interface
  • Secure Shell (SSH)

The user guide covers the SBC Web Interface in detail, so we will review SSH below.

SSH

If you are unfamiliar with SSH, it is a simple yet powerful tool that allows you to log into a remote machine in order to execute commands. You can also transfer files using the associated SCP tool.

In order to use SSH, you need to know the following things about the SBC:

  • IP address (e.g. 192.168.3.195) or the link local address (e.g. phidgetsbc.local)
  • The administrator password

You must also enable SSH on the SBC. You can do this via the SBC Web Interface which is shown in the image below:

SSH on Windows

To use SSH on Windows, we recommend PuTTY. Use the images below as a guide for configuring PuTTY (use the IP address or the link local address interchangeably):


After clicking open, simply login as root and provide the administrator password:


To transfer files between your SBC and Windows machine, we recommend either of these programs:

You will follow a similar process to access the SBC as described for SSH.

SSH on Linux and macOS

SSH is available on Linux and macOS by default. To run SSH, simply open the terminal and type the following:

ssh root@phidgetsbc.local

Or, something like this (you will need to know the IP address of your SBC):

ssh root@192.168.3.195

You will then be prompted for the password in order to gain access to the SBC:


To copy a file from the SBC to your development machine using SCP, simply open the terminal and type the following:

scp root@phidgetsbc.local:/path/to/source /path/to/destination

You can reverse this if you want to transfer a file from your development machine to your SBC:

scp  /path/to/source root@phidgetsbc.local:/path/to/destination

Installing Packages for Development

At this point you have connected to the SBC through one or more of these three options:

  • SBC Web Interface
  • SSH
  • Directly via monitor and keyboard

Now that you are connected, you may want to start developing on/for the SBC. Before you do this, you need to install some packages.

The simplest way to install C support on the SBC is by using the install buttons on located on the SBC Web Interface (System->Packages). Check Include full Debian Package Repository before installing.


You're now ready to begin programming! Continue through this guide for code examples and directions on where to go next.

Finding Code Samples

To find the code sample to use for your Phidget, navigate to the Code Samples page and select your device from the drop-down menu.

C sample code.jpg


Once you select your device, the code sample generator will give you a working code sample, and a selection of options to customize it to your needs.

Setting up a New Project

For simplicity, if you have not used Phidgets before, we recommend first trying them out directly on an external development machine like a desktop computer. For C development, check the GCC (Windows), GCC (MacOS), and GCC (Linux) pages.

When you are building a project from scratch, or adding Phidget functionality to an existing project, you'll need to configure your development environment to properly link the Phidget C library.

When developing on an external computer, you will write, compile, and test your programs on that machine. When you are ready, you will then upload your programs to the SBC to compile and run them.


Once your code is written, follow these steps to get your program running on the SBC:

1. Using the SBC Web Interface, create a new project:

2. Transfer all the project files from the development machine to the SBC, either using the SBC Web Interface or a tool like WinSCP. The project directory will be /usr/userapps/ProjectName.

3. Use SSH to access the SBC terminal

4. Navigate to the project folder using the command:

cd /usr/userapps/ProjectName

5. Compile the example by entering the following command in the terminal, replacing "example" with the name of your C file:

gcc example.c -o example -lphidget22

6. You can now run the program with the command:

./example

Success! The program is running on your SBC. Next, you may want to learn about running a program automatically.

Running a Program Automatically

After testing your program, you will likely want it to run on boot, or on a schedule, without your input.


Running a Program from the SBC Web Interface

To quickly test whether a program can be run automatically, you can try starting it from the SBC Web Interface.

1. To start the program, navigate to Projects->ProjectName->Startup Settings in the SBC Web Interface.

2. Select your program in the drop-down menu labeled Executable/Class Name.



3. Click the Start button on the SBC web interface.


4. You'll note that as it runs, there are two links below the Stop button which can be used to view the program output:

  • stdout: view the program output like you would in a terminal or command prompt
  • stderr: view the program error output

Run on Boot

Running on boot ensures that your program will never miss an event. As long as the SBC is running, your code will be running. This section assumes you have written and compiled your program on an external computer, and have uploaded it to the SBC Web Interface.


To have your program run on boot, navigate to Projects->ProjectName->Startup Settings in the SBC Web Interface. After selecting your project, copy the settings from the image below:



We will review some of the options that are shown in the image above:

  • Startup Order: lower numbers boot first. Booting later means more programs are available for use, booting earlier means other programs can use your program.
  • Run as a daemon: starts the program as a daemon. Unless you have explicitly written your program as a daemon, leave this checked, or else your SBC may hang on boot.
  • Executable/Class name: your main Java class or C file.
  • Arguments: any command line arguments the program needs.

After saving your changes, your program will run automatically whenever your SBC boots.


Run on a Schedule

Running your program on a schedule allows you to perform your task once a week, or once a minute without worrying about memory management issues or instability problems that may arise. It executes, and then gets cleaned up. To run your program on a schedule, we recommend using Cron. Cron can automatically schedule programs (known as jobs, or cron jobs). Cron simply reads a crontab file and runs whatever programs are listed, with whatever timing they are listed with. Cron runs continuously in the background, but the cron jobs only run as long as they naturally would, and then they exit.


Let's set up your first cron job. We will use nano to edit the crontab file, but feel free to use whatever editor you prefer.


First, set your editor to nano:

export EDITOR=nano

Next, edit your crontab file:

crontab -e

Finally, schedule your cron job:

#cron job that will run at 5AM every week:
0 5 * * 1 /root/code/myprogram argument1


After entering your task, simply save and exit the file.


What's Next?

Now that you have set up Phidgets to work with your programming environment, we recommend you read our guide on Phidget Programming Basics to learn the fundamentals of programming with Phidgets.Next Arrow.png