DST1002 User Guide: Difference between revisions

From Phidgets Support
(Created page with "__NOINDEX__ <metadesc>You can measure the distance of reflective objects up to 1m away with this time-of-flight sensor that connects to your Phidgets VINT Hub.</metadesc> Ca...")
 
No edit summary
Line 1: Line 1:
__NOINDEX__
__NOINDEX__
__NOTOC__
<metadesc>You can measure the distance of reflective objects up to 1m away with this time-of-flight sensor that connects to your Phidgets VINT Hub.</metadesc>
<metadesc>You can measure the distance of reflective objects up to 1m away with this time-of-flight sensor that connects to your Phidgets VINT Hub.</metadesc>
[[Category:UserGuide]]
[[Category:UserGuide]]
==Getting Started==
==Part 1: Setup==
{{UGIntro|DST1002}}
{{UGIntro|DST1002}}
*[{{SERVER}}/products.php?product_id=DST1002 DST1002 - Distance Phidget]
*[{{SERVER}}/products.php?product_id=DST1002 DST1002 - Distance Phidget]
Line 21: Line 22:
{{UGcontrolpanel|DST1002}}
{{UGcontrolpanel|DST1002}}


{{ugDistanceSensor|DST1002|}}
== Part 2: Using Your Phidget ==


{{ugAddressingInformation}}
===About===
The DST1002 uses reflected infrared light to measure distance.  Use this Phidget when measuring short distances or for detecting objects passing in front of the sensor. The sensor will measure distances from 20mm to 1300mm in optimal conditions with an accuracy of about 10mm.
[[Image:DST1002-About.jpg|center|link=]]


{{ugUsingYourOwnProgram|DST1002}}
===Explore Your Phidget Channels Using the Control Panel===


==Technical Details==
You can use your Control Panel to explore your Phidget's channels.


===Out-of-Range Error===
'''1.''' Open your Control Panel, and you will find the '''Distance Phidget 1300mm''' channel:
The DST1002 will fire out-of-range error events when the reflected IR light doesn't reach the sensor, meaning the object is out of range. Objects that do not reflect light well might be harder to detect at greater distances.


{{UGnext|}}
[[Image:DST1002_Panel.jpg|link=|center]]
 
'''2.''' Double click on the channel to open an example program. This channel belongs to the '''Distance Sensor''' channel class:
{{UGC-Start}}
 
{{UGC-Entry|Distance Sensor: |Measure distance between the DST1002 and the object
|
In your Control Panel, double click on "Distance Phidget 1300mm":
[[Image:DST1002-test-DistanceSensor.jpg|center|link=]]}}
 
{{UGC-End}}
 
{{UG-Part3}}
 
== Part 4: Advanced Topics and Troubleshooting ==
 
{{UGC-Start}}
{{UGC-Addressing}}
{{UGC-DataInterval}}
{{UGC-Entry|I'm getting an Out-of-Range Error|
|
The DST1002 will fire out-of-range error events when the reflected IR light does not reach the sensor, meaning the object is out of range. Objects that do not reflect light well might be harder to detect at greater distances.}}
{{UGC-End}}

Revision as of 18:26, 21 April 2020


Part 1: Setup

Welcome to the DST1002 user guide! In order to get started, make sure you have the following hardware on hand:


Next, you will need to connect the pieces:

DST1002 Functional.jpeg
  1. Connect the DST1002 to the VINT Hub using the Phidget cable.
  2. Connect the VINT Hub to your computer with a USB cable.


Now that you have everything together, let's start using the DST1002!

Using the DST1002

Phidget Control Panel

In order to demonstrate the functionality of the DST1002, the Phidget Control Panel running on a Windows machine will be used.


The Phidget Control Panel is available for use on both macOS and Windows machines.

Windows

To open the Phidget Control Panel on Windows, find the Ph.jpg icon in the taskbar. If it is not there, open up the start menu and search for Phidget Control Panel

Windows PhidgetTaskbar.PNG

macOS

To open the Phidget Control Panel on macOS, open Finder and navigate to the Phidget Control Panel in the Applications list. Double click on the Ph.jpg icon to bring up the Phidget Control Panel.


For more information, take a look at the getting started guide for your operating system:


Linux users can follow the getting started with Linux guide and continue reading here for more information about the DST1002.

First Look

After plugging the DST1002 into your computer and opening the Phidget Control Panel, you will see something like this:

DST1002 Panel.jpg


The Phidget Control Panel will list all connected Phidgets and associated objects, as well as the following information:

  • Serial number: allows you to differentiate between similar Phidgets.
  • Channel: allows you to differentiate between similar objects on a Phidget.
  • Version number: corresponds to the firmware version your Phidget is running. If your Phidget is listed in red, your firmware is out of date. Update the firmware by double-clicking the entry.


The Phidget Control Panel can also be used to test your device. Double-clicking on an object will open an example.

Part 2: Using Your Phidget

About

The DST1002 uses reflected infrared light to measure distance. Use this Phidget when measuring short distances or for detecting objects passing in front of the sensor. The sensor will measure distances from 20mm to 1300mm in optimal conditions with an accuracy of about 10mm.

DST1002-About.jpg

Explore Your Phidget Channels Using the Control Panel

You can use your Control Panel to explore your Phidget's channels.

1. Open your Control Panel, and you will find the Distance Phidget 1300mm channel:

DST1002 Panel.jpg

2. Double click on the channel to open an example program. This channel belongs to the Distance Sensor channel class:

Expand All
Distance Sensor: Measure distance between the DST1002 and the object

In your Control Panel, double click on "Distance Phidget 1300mm":

Part 3: Create your Program

1. Setting up your Programming Environment

2. Phidget Programming Basics

Part 4: Advanced Topics and Troubleshooting

Expand All
How do I know what channel, serial number, or hub port to use in my program?

Before you open a Phidget channel in your program, you can set these properties to specify which channel to open. You can find this information through the Control Panel.

1. Open the Control Panel and double-click on the red map pin icon:

The locate Phidget button is found in the device information box

2. The Addressing Information window will open. Here you will find all the information you need to address your Phidget in your program.

All the information you need to address your Phidget


See the Phidget22 API for your language to determine exact syntax for each property.

Setting the Change Trigger and Data Interval

The Change Trigger is the minimum change in the sensor data needed to trigger a new data event.

The Data Interval is the time (in ms) between data events sent out from your Phidget.

The Data Rate is the reciprocal of Data Interval (measured in Hz), and setting it will set the reciprocal value for Data Interval and vice-versa.

You can modify one or both of these values to achieve different data outputs. You can learn more about these properties here.

I'm getting an Out-of-Range Error

The DST1002 will fire out-of-range error events when the reflected IR light does not reach the sensor, meaning the object is out of range. Objects that do not reflect light well might be harder to detect at greater distances.