3053 User Guide: Difference between revisions

From Phidgets Support
Line 37: Line 37:
#The bottom row of the digital out shows the status of the request, while the top row displays the status of the digital output as reported by the 3053 Relay.
#The bottom row of the digital out shows the status of the request, while the top row displays the status of the digital output as reported by the 3053 Relay.


|[[File:3053_0_Control_Panel_Screen.jpg]]
|[[File:3053_0_Control_Panel_Screen.jpg]]||
}}
}}



Revision as of 16:20, 20 July 2012

Getting Started

Checking the Contents

You should have received:

  • A Dual SSR board

In order to test your new Phidget you will also need:

  • A PhidgetInterfaceKit 8/8/8 or PhidgetTextLCD
  • A USB cable
  • A 9V batter, a battery connector
  • An incandescent bulb
  • 2 pieces of wire

Connecting the Pieces

  1. Connect the positive/red wire from the battery to one output terminal of the SSR Board
  2. Connect negative/black wire from the battery to one of the bulb wire.
  3. Connect the bulb wire to the other output terminal of the SSR board.
  4. Attach the SSR Board to your PhidgetInterfaceKit by connecting a wire from the terminal block marked with a + to a digital output and another wire from the terminal block marked with a - to any ground terminal on the InterfaceKit.
  5. Connect the PhidgetInterfaceKit Board to your computer using the USB cable.

3053 0 Connecting The Hardware.jpg

Testing Using Windows 2000 / XP / Vista / 7

Make sure you have the current version of the Phidget library installed on your PC. If you don't, follow these steps:

  1. Go to the Quick Downloads section on the Windows page
  2. Download and run the Phidget21 Installer (32-bit, or 64-bit, depending on your system)
  3. You should see the Ph.jpg icon on the right hand corner of the Task Bar.

Running Phidgets Sample Program

Double clicking on the Ph.jpg icon loads the Phidget Control Panel; we will use this program to ensure that your new Phidget works properly.

The source code for the InterfaceKit-full sample program can be found in the quick downloads section on the C# Language Page. If you'd like to see examples in other languages, you can visit our Languages page.

Updating Device Firmware

If an entry in this list is red, it means the firmware for that device is out of date. Double click on the entry to be given the option of updating the firmware. If you choose not to update the firmware, you can still run the example for that device after refusing.

#Double Click on Phidget InterfaceKit 8/8/8 in the Phidget Control Panel to bring up InterfaceKit-full and check that the box labelled Attached contains the word True.
  1. Turn the bulb on and off by clicking on the Digital output box.
  2. The bottom row of the digital out shows the status of the request, while the top row displays the status of the digital output as reported by the 3053 Relay.


File:3053 0 Control Panel Screen.jpg

Testing Using Mac OS X

  1. Go to the Quick Downloads section on the Mac OS X page
  2. Download and run the Phidget OS X Installer
  3. Click on System Preferences >> Phidgets (under Other) to activate the Preference Pane
  4. Make sure that the is properly attached.
  5. Double Click on in the Phidget Preference Pane to bring up the Sample program. This program will function in a similar way as the Windows version.

Using Linux

For a step-by-step guide on getting Phidgets running on Linux, check the Linux page.

Using Windows Mobile / CE 5.0 / CE 6.0

Template:UGce

Technical Details

API

Template:UGapih

Data Structures

Functions

Template:UGapi

Events

Template:UGapi

Product History

Template:UGhist Template:UGrow