1144 User Guide: Difference between revisions

From Phidgets Support
No edit summary
No edit summary
 
(3 intermediate revisions by 3 users not shown)
Line 1: Line 1:
__NOINDEX__
<metadesc>Phidgets mostly run on 5V, but if you need 12V to power up your sensor you can use the 12V Sensor Adapter.</metadesc>
[[Category:UserGuide]]
[[Category:UserGuide]]
==Getting Started==
{{UgSensorIntro|1144|12V Sensor Adapter|Voltage Input port}}
*12 Volt sensor


===Required Hardware===


* A [{{SERVER}}/products.php?product_id=1144 1144 12V Sensor Adapter]
Next, you will need to connect the pieces:
* An InterfaceKit or Hub to read the adapter
* A Phidget cable
* A USB cable
* A computer
* A 12V sensor
 
===Connecting the Pieces===
[[Image:1144_0_Connecting_The_Hardware.jpg|400px|right|link=]]
[[Image:1144_0_Connecting_The_Hardware.jpg|400px|right|link=]]
# Connect the 12V sensor to the adapter.
# Connect the 12V sensor to the 1144.
# Connect the adapter to the InterfaceKit or Hub with the Phidget cable.
# Connect the 1144 to the HUB0000 with the Phidget cable.
# Connect the InterfaceKit or Hub to your computer with the USB cable.
# Connect the HUB0000 to your computer with the USB cable.


<br clear="all">
<br clear="all">
==Testing Using Windows==
{{UGIntroDone|1144}}
 
==Using the 1144==
{{UGcontrolpanelSensor|1144|HUB0000}}


{{UgSensor}}
===Voltage Input===
Double-click on a Voltage Input object in order to run the example:
[[File:1010_1018_1019_VoltageInputSensor_Example.jpg|link=|center]]
{{UGExampleDescription}}
*Modify the change trigger and/or data interval value by dragging the sliders. For more information on these settings, see the [[Data_Rate_and_Change_Trigger|data interval/change trigger]] page.
*To find out how to convert your ''Voltage'' value into a useful quantity, check out the [[#Formulas|formulas]] section below.


==Technical Details==
==Technical Details==
===Interfacing a CE Transducer===
===Interfacing a CE Transducer===
 
To interface with a CE transducer sold by us, simply connect the wires as shown in the following image.
To interface with a CE transducer sold at Phidgets Inc., simply connect the wires as shown in the following image.
[[File:1144_CE.jpg|link=|400px|center]]
 
[[File:1144_CE.jpg|thumb|400px|link=|Connection to a CE transducer, a type of 12V sensor sold at Phidgets Inc.]]
 
<br clear=all>
<br clear=all>


===Interfacing a 12V NPN Sensor===
===Interfacing a 12V NPN Sensor===
 
[[File:1144_0_NPN.jpg|link=|400px|center]]
[[File:1144_0_NPN.jpg|thumb|400px|link=|Left: Connection using an analog input and a pull-up resistor.<br>Right: Connection using an analog input and a digital input.]]


In order to interface with a 12V sensor with an NPN output, you need a 12V sensor adapter and an Interface Kit. There are two ways to connect them, as shown in the figures.
In order to interface with a 12V sensor with an NPN output, you need a 12V sensor adapter and an Interface Kit. There are two ways to connect them, as shown in the figures.
Line 43: Line 43:


===Interfacing a 12V PNP Sensor===
===Interfacing a 12V PNP Sensor===
[[File:1144_0_PNP.jpg|thumb|400px|link=|Connection using an analog input and a pull-down resistor.]]
[[File:1144_0_PNP.jpg|400px|link=|center]]


In order to interface with a 12V sensor with an PNP output, you need a 12V sensor adapter and an Interface Kit.
In order to interface with a 12V sensor with an PNP output, you need a 12V sensor adapter and an Interface Kit. Simply connect the 12V sensor adapter to an analog input on the HUB0000 (, and then attach the 12V sensor to the adapter with a 10kΩ pull-down resistor placed across the ground and analog signal lines, as pictured. There should be two 10kΩ resistors packaged with your 12V sensor adapter.
Simply connect the 12V sensor adapter to an analog input on the Interface Kit, and then attach the 12V sensor to the adapter with a 10kΩ pull-down resistor placed across the ground and analog signal lines, as pictured. There should be two 10kΩ resistors packaged with your 12V sensor adapter.


<br clear=all>
<br clear=all>

Latest revision as of 20:38, 8 May 2018


Getting Started

Welcome to the 1144 user guide! In order to get started, make sure you have the following hardware on hand:


Next, you will need to connect the pieces:

1144 0 Connecting The Hardware.jpg
  1. Connect the 12V sensor to the 1144.
  2. Connect the 1144 to the HUB0000 with the Phidget cable.
  3. Connect the HUB0000 to your computer with the USB cable.


Now that you have everything together, let's start using the 1144!

Using the 1144

Phidget Control Panel

In order to demonstrate the functionality of the 1144, we will connect it to the HUB0000, and then run an example using the Phidget Control Panel on a Windows machine.


The Phidget Control Panel is available for use on both macOS and Windows machines. If you would like to follow along, first take a look at the getting started guide for your operating system:


Linux users can follow the getting started with Linux guide and continue reading here for more information about the 1144.

First Look

After plugging in the 1144 into the HUB0000, and the HUB0000 into your computer, open the Phidget Control Panel. You will see something like this:

HUB0000 Panel.jpg


The Phidget Control Panel will list all connected Phidgets and associated objects, as well as the following information:

  • Serial number: allows you to differentiate between similar Phidgets.
  • Channel: allows you to differentiate between similar objects on a Phidget.
  • Version number: corresponds to the firmware version your Phidget is running. If your Phidget is listed in red, your firmware is out of date. Update the firmware by double-clicking the entry.


The Phidget Control Panel can also be used to test your device. Double-clicking on an object will open an example.

Voltage Input

Double-click on a Voltage Input object in order to run the example:

1010 1018 1019 VoltageInputSensor Example.jpg

General information about the selected object will be displayed at the top of the window. You can also experiment with the following functionality:

  • Modify the change trigger and/or data interval value by dragging the sliders. For more information on these settings, see the data interval/change trigger page.
  • To find out how to convert your Voltage value into a useful quantity, check out the formulas section below.

Technical Details

Interfacing a CE Transducer

To interface with a CE transducer sold by us, simply connect the wires as shown in the following image.

1144 CE.jpg


Interfacing a 12V NPN Sensor

1144 0 NPN.jpg

In order to interface with a 12V sensor with an NPN output, you need a 12V sensor adapter and an Interface Kit. There are two ways to connect them, as shown in the figures. The first way simply involves connecting the 12V sensor adapter to an analog input on the Interface Kit, and then attaching the 12V sensor to the adapter with a 10kΩ pull-up resistor placed across the +12V and analog signal lines, as pictured. There should be two 10kΩ resistors packaged with your 12V sensor adapter.

When using this setup, the voltage input will show a voltage of about 5V when the NPN sensor is open, and a much lower value (less than 1V) when the sensor is closed. Likewise, if you're using an active-low digital input, the input will be low when the NPN sensor is open, and high when it is closed.


Interfacing a 12V PNP Sensor

1144 0 PNP.jpg

In order to interface with a 12V sensor with an PNP output, you need a 12V sensor adapter and an Interface Kit. Simply connect the 12V sensor adapter to an analog input on the HUB0000 (, and then attach the 12V sensor to the adapter with a 10kΩ pull-down resistor placed across the ground and analog signal lines, as pictured. There should be two 10kΩ resistors packaged with your 12V sensor adapter.


Formulas

The 1144 returns a voltage between 0 and 5 volts. Check the documentation for your specific sensor to determine the formula for converting from return voltage to the measured value.

Phidget Cable

Analoginput.jpg

The Phidget Cable is a 3-pin, 0.100 inch pitch locking connector. Pictured here is a plug with the connections labelled. The connectors are commonly available - refer to the Analog Input Primer for manufacturer part numbers.

What to do Next

  • Programming Languages - Find your preferred programming language here and learn how to write your own code with Phidgets!
  • Phidget Programming Basics - Once you have set up Phidgets to work with your programming environment, we recommend you read our page on to learn the fundamentals of programming with Phidgets.