1126 User Guide - Revision history

Mparadis: /* Formulas */

2018-05-10T17:50:18Z

Formulas

← Older revision		Revision as of 17:50, 10 May 2018
Line 27:		Line 27:

	===Formulas===		===Formulas===
	{{UGSensorFormula\|pressure (kPa)}} The Formula to translate voltage from the sensor into pressure is:		{{UGSensorFormula\|pressure (kPa)}} The Formula to translate voltage ratio from the sensor into pressure is:


	:<math>		:<math>
	\text{Pressure (kPa)}= ~~\frac{100~~ \times \text{~~Voltage}}{9~~} - 27.7777		\text{Pressure (kPa)}= (55.55 \times \text{VoltageRatio}) - 27.7777
	</math>		</math>

Line 37:		Line 37:

	:<math>		:<math>
	\text{Pressure (psi)} = \text{(~~Voltage~~} \times \text{1.61) - 4.0277}		\text{Pressure (psi)} = \text{(VoltageRatio} \times \text{8.05) - 4.0277}
	</math>		</math>

Mparadis at 20:56, 8 May 2018

2018-05-08T20:56:20Z

← Older revision		Revision as of 20:56, 8 May 2018
Line 1:		Line 1:
			__NOINDEX__
	<metadesc>The Phidgets Differential Air Pressure Sensor plugs into an Analog Input or VINT Hub port and measures pressure from -25 kPa to 25 kPa.</metadesc>		<metadesc>The Phidgets Differential Air Pressure Sensor plugs into an Analog Input or VINT Hub port and measures pressure from -25 kPa to 25 kPa.</metadesc>
	[[Category:UserGuide]]		[[Category:UserGuide]]

Jdecoux at 17:28, 11 April 2018

2018-04-11T17:28:58Z

← Older revision		Revision as of 17:28, 11 April 2018
Line 7:		Line 7:
	Next, you will need to connect the pieces:		Next, you will need to connect the pieces:
	[[Image:1126_1_Connecting_The_Hardware.jpg\|500px\|right\|link=]]		[[Image:1126_1_Connecting_The_Hardware.jpg\|500px\|right\|link=]]
	# Connect the 1126 to the ~~1018~~ with the Phidget cable.		# Connect the 1126 to the HUB0000 with the Phidget cable.
	# Connect the ~~1018~~ to your computer with the USB cable.		# Connect the HUB0000 to your computer with the USB cable.

	<br clear="all">		<br clear="all">
Line 14:		Line 14:

	==Using the 1126==		==Using the 1126==
	{{UGcontrolpanelSensor\|1126\|~~1018~~}}		{{UGcontrolpanelSensor\|1126\|HUB0000}}

	{{UGSensorVoltageRatioInput\|1126\|pressure (kPa)}}		{{UGSensorVoltageRatioInput\|1126\|pressure (kPa)}}

Mparadis at 16:16, 29 November 2017

2017-11-29T16:16:37Z

← Older revision		Revision as of 16:16, 29 November 2017
Line 1:		Line 1:
			<metadesc>The Phidgets Differential Air Pressure Sensor plugs into an Analog Input or VINT Hub port and measures pressure from -25 kPa to 25 kPa.</metadesc>
	[[Category:UserGuide]]		[[Category:UserGuide]]
	==Getting Started==		==Getting Started==

Lmpacent at 19:30, 21 June 2017

2017-06-21T19:30:43Z

← Older revision		Revision as of 19:30, 21 June 2017
Line 5:		Line 5:

	Next, you will need to connect the pieces:		Next, you will need to connect the pieces:
	[[Image:1126_1_Connecting_The_Hardware.jpg\|~~400px~~\|right\|link=]]		[[Image:1126_1_Connecting_The_Hardware.jpg\|500px\|right\|link=]]
	# Connect the 1126 to the 1018 with the Phidget cable.		# Connect the 1126 to the 1018 with the Phidget cable.
	# Connect the 1018 to your computer with the USB cable.		# Connect the 1018 to your computer with the USB cable.

Lmpacent at 16:35, 19 June 2017

2017-06-19T16:35:56Z

← Older revision		Revision as of 16:35, 19 June 2017
Line 18:		Line 18:

	==Technical Details==		==Technical Details==
	===~~Pressure Sensor~~===		===General===
	The 1126 uses bipolar processing to provide an accurate, high level analog input signal that is proportional to the applied pressure. When the sensor is plugged in, the voltage defaults to 2.5V ±2%.		The 1126 uses bipolar processing to provide an accurate, high level analog input signal that is proportional to the applied pressure. When the sensor is plugged in, the voltage defaults to 2.5V ±2%.

Lmpacent at 22:32, 16 June 2017

2017-06-16T22:32:12Z

← Older revision		Revision as of 22:32, 16 June 2017
Line 22:		Line 22:

	===Ports===		===Ports===
	The sensor comes with a positive top port and a negative bottom port. These ports have a diameter of 2.79mm to 3.30 mm (nominal 3mm). For hosing, we recommend using polyurethane tubing. We have had good results with 2.4mm ID tubing from [http://www.emicorp.com/ ~~emicorp~~]. In imperial measurement, 3/32” ID tubing is equivalent. This is available through laboratory supply stores such as [http://coleparmer.com Cole Parmer].		The sensor comes with a positive top port and a negative bottom port. These ports have a diameter of 2.79mm to 3.30 mm (nominal 3mm). For hosing, we recommend using polyurethane tubing. We have had good results with 2.4mm ID tubing from [http://www.emicorp.com/ EMI]. In imperial measurement, 3/32” ID tubing is equivalent. This is available through laboratory supply stores such as [http://coleparmer.com Cole Parmer].

	===Formulas===		===Formulas===

Lmpacent at 21:26, 16 June 2017

2017-06-16T21:26:17Z

← Older revision		Revision as of 21:26, 16 June 2017
Line 15:		Line 15:
	{{UGcontrolpanelSensor\|1126\|1018}}		{{UGcontrolpanelSensor\|1126\|1018}}

	{{UGSensorVoltageRatioInput\|1126\|pressure}}		{{UGSensorVoltageRatioInput\|1126\|pressure (kPa)}}

	==Technical Details==		==Technical Details==
Line 25:		Line 25:

	===Formulas===		===Formulas===
	{{UGSensorFormula\|pressure}} The Formula to translate voltage from the sensor into pressure is:		{{UGSensorFormula\|pressure (kPa)}} The Formula to translate voltage from the sensor into pressure is:

Lmpacent at 18:32, 16 June 2017

2017-06-16T18:32:58Z

← Older revision		Revision as of 18:32, 16 June 2017
Line 1:		Line 1:
	[[Category:UserGuide]]		[[Category:UserGuide]]
			==Getting Started==
			{{UgSensorIntro\|1126\|Differential Gas Pressure Sensor ± 25kPa\|Voltage Ratio Input port}}

	~~===Required Hardware===~~

	* A [{{SERVER}}/products.php?product_id=1126 1126 Gas Pressure Sensor]		Next, you will need to connect the pieces:
	* An InterfaceKit or Hub to ~~read~~ the ~~sensor~~
	* A Phidget cable
	* A USB cable
	* A computer

	~~===Connecting the Pieces===~~
	[[Image:1126_1_Connecting_The_Hardware.jpg\|400px\|right\|link=]]		[[Image:1126_1_Connecting_The_Hardware.jpg\|400px\|right\|link=]]
	# Connect the ~~pressure sensor~~ to the ~~InterfaceKit or Hub~~ with the Phidget cable.		# Connect the 1126 to the 1018 with the Phidget cable.
	# Connect the ~~InterfaceKit or Hub~~ to your computer with the USB cable.		# Connect the 1018 to your computer with the USB cable.

	<br clear="all">		<br clear="all">
	~~==Testing Using Windows==~~		{{UGIntroDone\|1126}}

	{{~~UgSensor~~}}		==Using the 1126==
			{{UGcontrolpanelSensor\|1126\|1018}}

			{{UGSensorVoltageRatioInput\|1126\|pressure}}

	==Technical Details==		==Technical Details==
	~~The Differential Gas~~ Pressure Sensor uses bipolar processing to provide an accurate, high level analog input signal that is proportional to the applied pressure.		===Pressure Sensor===
			The 1126 uses bipolar processing to provide an accurate, high level analog input signal that is proportional to the applied pressure. When the sensor is plugged in, the voltage defaults to 2.5V ±2%.
	When the sensor is plugged in, the ~~sensor~~ voltage defaults to 2.5V ~~+-2~~%.

	===Ports===		===Ports===
	The sensor comes with a positive top port and a negative bottom port. These ports have a diameter of 2.79mm to 3.30 mm (nominal 3mm). For hosing, we recommend using polyurethane tubing. We have had good results with 2.4mm ID tubing from ~~Emiplastics~~.com. In imperial measurement, 3/32” ID tubing is equivalent. This is available through laboratory supply stores such as Cole Parmer.		The sensor comes with a positive top port and a negative bottom port. These ports have a diameter of 2.79mm to 3.30 mm (nominal 3mm). For hosing, we recommend using polyurethane tubing. We have had good results with 2.4mm ID tubing from [http://www.emicorp.com/ emicorp]. In imperial measurement, 3/32” ID tubing is equivalent. This is available through laboratory supply stores such as [http://coleparmer.com Cole Parmer].

	===Formulas===		===Formulas===
	The Formula to translate voltage from the sensor into ~~Pressure~~ is:		{{UGSensorFormula\|pressure}} The Formula to translate voltage from the sensor into pressure is:


Line 42:		Line 39:


	~~'''Note:''' 1.0 kPa~~ = ~~0.145 psi~~		<br clear="all">

	{{UGasens}}		{{UGasens}}

	{{UGnext\|}}		{{UGnext\|}}

Mparadis at 16:18, 6 June 2017

2017-06-06T16:18:43Z

← Older revision		Revision as of 16:18, 6 June 2017
Line 3:		Line 3:
	===Required Hardware===		===Required Hardware===

	* A 1126 Gas Pressure Sensor		* A [{{SERVER}}/products.php?product_id=1126 1126 Gas Pressure Sensor]
	* An InterfaceKit or Hub to read the sensor		* An InterfaceKit or Hub to read the sensor
	* A Phidget cable		* A Phidget cable