With an IP65 rating, this enclosure will protect your Phidgets from the elements. With proper installation of the foam rubber sealing ring, even the heaviest of rainstorms won't get through. All that is needed to assemble is a Phillips screwdriver.
|Material||High impact ABS|
|Volume||approx. 2525 cm³|
Getting wires in and out of an enclosure while keeping the whole system waterproof can be a challenge. These cable connectors and glands will simplify the process greatly. You can drill a hole in the side of the enclosure, and then install a connector or gland. Cable glands allow the cable to pass through the hole in once piece, while cable connectors have pins to solder to in the inside, and a connector on the outside for projects that benefit from having an easy disconnection/reconnection point.
|BOX4200_0||$5.00||High impact ABS||approx. 550 cm³||108x83x63 mm|
|BOX4201_0||$8.00||High impact ABS||approx. 613 cm³||167x108x34 mm|
|BOX4202_0||$12.00||High impact ABS||approx. 695 cm³||130x80x67 mm|
|BOX4203_0||$10.00||High impact ABS||approx. 1425 cm³||192x112x67 mm|
|BOX4204_0||$12.00||High impact ABS||approx. 1425 cm³||192x112x67 mm|
|BOX4205_0||$12.00||High impact ABS||approx. 2525 cm³||223x143x80 mm|
|BOX4206_0||$15.00||High impact ABS||approx. 2525 cm³||223x143x80 mm|
|BOX4207_0||$20.00||High impact ABS||approx. 2990 cm³||215x145x96 mm|