Quantity Available: 104
| Qty | Price |
|---|---|
| 5 | $7.60 |
| 10 | $7.20 |
| 25 | $6.40 |
| 50 | $5.60 |
| 100 | $5.20 |
| 250 | $4.80 |
| 500 | $4.40 |
| 1000 | $4.00 |
The 3823 Enclosure is designed to protect the Rev 0 version of the 3060 – USB Isolator while giving you access to all terminals and connectors through openings in the enclosure.
You can plug and unplug cables, connect and disconnect devices, without having to open the enclosure.
Note: The Phidget board is not included with the enclosure and must be purchased separately.
|
Be careful when tightening the mounting screws as too much tension could crack the acrylic. |
This enclosure is desgined to fit the following Phidgets. See the "Resources" tab for assembly instructions.
$58.30
| Physical Properties | |
|---|---|
| Fits Board Revision | 0 |
| Material | Clear Acrylic |
| Thickness | 3.2 mm |
| IP Rating | 20 |
