Products for USB Sensing and Control Canada flag
Products for USB Sensing and Control

sales inquiries

quotes, distributor information, purchase orders
sales@phidgets.com

technical inquiries

support, advice, warranty, returns, misshipment
support@phidgets.com

website inquiries

corrections or suggestions
web@phidgets.com

Address

Unit 1 - 6115 4 St SE
Calgary AB  T2H 2H9
Canada

PHIDGETS Inc.

Unit 1 - 6115 4 St SE
Calgary AB  T2H 2H9
Canada
+1 403 282-7335

25mm Double Ended Output Shaft for Series 63 Worm Gearbox

ID: TRM4011_0

This double ended gearshaft allows you to mount something on either end of a series 63 worm gearbox.

$8.90

Quantity Available: 45

Qty Price
5 $8.54
10 $8.19

25mm single ended shaft for series 63 worm gearboxes. W/ keyway and keys included as well as a pair of washers and snap rings for retention in the gearbox.

Worm Gearboxes

This shaft is designed to fit into a worm gearbox and act as an output shaft. You can install it by following these steps:

  • Put the keys into the keyways on the shaft.
  • Slide the shaft through the gearbox until it's centered inside.
  • Slide washers onto both ends of the shaft.
  • Put snap rings onto both ends of the shaft so that the washer is between the snap ring and the gearbox (There is a groove at the end of the shaft for the ring to rest inside).
Product Gearbox Properties
Part Number Price Gearbox Series Gear Ratio Maximum Strength of Gears Input Shaft Diameter
TRM4403_0
163Nm 63 Series Worm Gearbox 30:1
$111.00 63 30 : 1 163 N·m 19 mm

Shaft Couplers

If you need to connect this shaft to a motor or another device with a shaft, you can use a shaft coupler:

Product Physical Properties
Part Number Price Inner Diameter Material Coupling Rated Torque Coupling Rated Speed
TRM4325_0
Jaw Coupling Half 25mm Series 24
$6.85 25 mm Aluminum 611.8 kg·cm 4000 RPM
TRM4329_0
Jaw Coupling Half 25mm Series 38
$7.40 25 mm Aluminum 3.3 Mg·cm 4000 RPM

Pulleys and Sprockets

If you're using a rotary system that requires a lot of torque, you may be interested in pulleys and sprockets. By using a two pulleys or sprockets of different sizes, you can increase the gear ratio of the system. Pulleys and sprockets can also be used to transmit rotation over a long distance. For more guidance on building a transmission system, visit our Rotary Motion Guide. Here is a list of our 25mm bore pulleys and sprockets:

Product Physical Properties
Part Number Price Inner Diameter Number of Teeth
TRM4155_0
#40 Chain Sprocket with 25mm Bore and 20 Teeth
$7.00 25 mm 20
TRM4156_0
#40 Chain Sprocket with 25mm Bore and 40 Teeth
$17.50 25 mm 40
TRM4157_0
#40 Chain Sprocket with 25mm Bore and 60 Teeth
$27.00 25 mm 60

Rotary Bearings

Systems with heavy loads or pulley/sprocket assemblies often put a lot of sideways strain on the shaft. In such a system, you can use rotary bearings to protect and support the shaft:

Product Physical Properties Mechanical Properties
Part Number Price Inner Diameter Bearing Type Static Load Dynamic Load
TRM4506_0
Flanged Rotary Bearing for 25mm Shaft
$5.25 25 mm Rotary Shaft (Flanged) 7.9 kN 14 kN
TRM4507_0
Pillow Block Rotary Bearing for 25mm Shaft
$5.75 25 mm Rotary Shaft (Pillow Block) 7.9 kN 14 kN

Product Specifications

Physical Properties
Diameter 25 mm
Keyway Width 8 mm
Gearbox Series 63
Customs Information
Canadian HS Export Code 8483.10.00
American HTS Import Code 8483.10.50.00
Country of Origin CN (China)

Documents

Product Physical Properties
Part Number Price Gearbox Series
TRM4010_0
25mm Single Ended Output Shaft for Series 63 Worm Gearbox
$7.40 63
TRM4011_0
25mm Double Ended Output Shaft for Series 63 Worm Gearbox
$8.90 63